Quality Segment
material
borosilicate glass fiber (BGF) membrane, fluoroelastomer O-ring, mixed cellulose esters (MCE) membrane, polypropylene support
reg. compliance
meets EU 1935/2004/EC (all component materials), meets FDA 21 CFR 177-182 (all component materials)
sterility
non-sterile
sterilization compatibility
autoclavable compatible
steam-in-place compatible
product line
Polysep™
feature
hydrophilic
technique(s)
prefiltration: suitable
L
30 in.
W
2.7 in.
filtration area
1.38 m2
impurities
<0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
matrix
Polysep™ II
pore size
1.0/0.2 μm nominal pore size
cartridge code
Code 7
Analysis Note
Effluent was negative after a water flush of 15 L per autoclaved 30-inch equivalent.
Other Notes
Directions for Use:
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer first page of Visual Inspection Guide and introduction section of Mixed cellulose esters Tech Brief
- Storage Statement: Please refer Mixed cellulose esters Tech Brief
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations
Legal Information
Polysep is a trademark of Sigma-Aldrich Co. LLC
Still not finding the right product?
Explore all of our products under Polysep™II 1.0/0.2 µm 标称，小柱
signalword
Danger
hcodes
Hazard Classifications
Flam. Sol. 1
存储类别
4.1B - Flammable solid hazardous materials
wgk
WGK 2