产品名称
TSKgel® GMHHR-H(S) HT HPLC Column, phase polystyrene-divinylbenzene, L × I.D. 30 cm × 7.8 mm, 13 μm particle size
material
stainless steel hardware
agency
suitable for USP L21
product line
TSKgel®
mol wt
1000 -400,000,000
manufacturer/tradename
Tosoh 18393
parameter
140 °C temperature, 2.5 mL/min flow rate, 20 bar max. pressure
technique(s)
HPLC: suitable
L × I.D.
30 cm × 7.8 mm
matrix
polymer particle platform
matrix active group
polymer, polystyrene-divinylbenzene phase
particle size
13 μm
pore size
mixed
separation technique
size exclusion (SEC)
General description
TSKgel HT (High Temperature) columns are for the analysis of organic-soluble polymers at temperatures up to 140°C and are shipped in o-dichlorobenzene (ODCB), which can be exchanged for 1-chloronaphthalene and trichlorobenzene. The TSKgel mixed bed columns are packed with particles of different pore sizes that are blended to provide an extended linear calibration curve. Mixed bed columns are used when a broad range of polymer molar masses is expected in the sample. Shearing, which can be observed when analyzing ultra-high molar mass polymers on columns packed with 5 micron or smaller particles, can be overcome by using the TSKgel GMHhr-H(S) HT column, which is packed with 13 micron particles. The (S) is a reference to this shearing effect.
The issue of shearing that occurs with the analysis of ultra-high molar mass polymers is overcome by the TSKgel GMHhr-H(S) HT column. The (S) is a reference to this shearing effect.
Physical form
ODCB can be exchanged by 1-chloronaphthalene and trichlorobenzene.
Legal Information
TSKgel is a registered trademark of Tosoh Corporation