Select a Size
About This Item
Product Name
Millipak® Final Fill 60 Durapore®, Inlet: 3/4 in. Sanitary Flange Outlet: 1/4 in. Hose Barb Vent: 1/8 in. Hose Barb
material
PVDF membrane, polysulfone housing, silicone O-ring
reg. compliance
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials )
sterility
sterile
product line
Millipak® Final Fill
feature
hydrophilic
manufacturer/tradename
Durapore®
parameter
0.7 bar max. differential pressure (10 psid) at 25 °C (Reverse), 1.7 bar max. differential pressure (25 psid) at 80 °C (Forward), 5.5 bar max. differential pressure (80 psid) at 25 °C (Forward)
technique(s)
sterile filtration: suitable
filter diam.
7.6 cm (3.0 in.)
filtration area
300 cm2
impurities
<0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
matrix
Durapore®
pore size
0.22 μm pore size
bubble point
≥50 psi (3450 mbar), air with water at 23 °C
fitting
19 mm (3/4 in.) inlet sanitary flange, 6 mm (1/4 in.) outlet hose barb
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer general guidelines section of user guide shipped with this product
- Storage Statement: Please refer user guide shipped with this product
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations
Legal Information
Still not finding the right product?
Explore all of our products under Millipak® Final Fill 60 Durapore®
Regulatory Information
This item has
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.