SPGPM20RJ
Millipore® Steripak Pressure Filter
pore size 0.22 μm, polyethersulfone membrane, 4-stack, pack of 3 ea
material
polyethersulfone membrane
styrene-acrylonitrile (SAN)
Quality Level
sterility
sterile
product line
Steripak
feature
holdup volume 2.7 mL
hydrophilic
packaging
pack of 3 ea
parameter
0.35 bar max. inlet pressure (5 psi) (Reverse)
45 °C max. temp.
5.2 bar max. inlet pressure (75 psi) (Forward)
technique(s)
sterile filtration: suitable
H
76 mm
diam.
9.9 cm
filter diam.
160 mm
filtration area
200 cm2
matrix
Express PLUS™
pore size
0.22 μm pore size
fitting
6 mm (1/4 in.) inlet stepped hose barb
outlet filling bell
6 mm (1/4 in.) outlet stepped hose barb
shipped in
ambient
Related Categories
General description
Steripak-GP filter units are designed for larger scale, pressure-driven filtration of tissue culture media with or without serum. Each filter is for a single use and is not autoclavable. The filter units come in two sizes with the smaller unit able to filter up to 10 L and the larger up to 20 L.
Features & Benefits:
- Millipore Express PLUS membrane for fastest flow rates and low protein binding
- Larger scale, pressure-driven filtration device for faster flow rates speeds time-consuming, large-volume filtrations
- 10 L and 20 L capacity sizes for maximum laboratory-scale filtration options
- Manually operated top air vent to prevent air lock stop of flow
- Filling bell for cleaner filling environment around the opening of the receptacle bottle
Applications:
Sterilization of Aqueous Solutions, Media Preparation, Buffer Preparation
Application
0.22 µm pore size, polyethersulfone membrane, 4-stack sterilized by gamma irradiation
Principle
Physical form
Preparation Note
Gamma irradiation
Other Notes
- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilization of Aqueous Solutions, Media Preparation, Buffer Preparation
- Instructions for Use: Please refer to Instructions for Use section of Steripak user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal Information
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.
Difficulty Finding Your Product Or Lot/Batch Number?
How to Find the Product Number
Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).
Example:
Additional examples:
705578-5MG-PW
PL860-CGA/SHF-1EA
MMYOMAG-74K-13
1000309185
enter as 1.000309185)
Having trouble? Feel free to contact Technical Service for assistance.
How to Find a Lot/Batch Number for COA
Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.
Aldrich Products
For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').
For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').
For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.
Not Finding What You Are Looking For?
In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service