Skip to Content
Merck
CN

Key Documents

View All Documentation

SVSXA47FF3

Multimedia Durapore® 1.2/0.2/0.22 µm, OptiScale® Capsule

OptiScale® 47, filter filtration area 17.7 cm²

Synonym(s):

Multimedia Durapore® 1.2/0.2/0.22 µm, OptiScale® Capsule

Sign In to View Organizational & Contract Pricing.

Select a Size

Change View

About This Item

UNSPSC Code:
23151806
Technical Service
Need help? Our team of experienced scientists is here for you.
Let Us Assist

Product Name

OptiScale® 47 Capsule Media: Milligard® 1.2 / 0.2 / 0.22 µm Nominal, Max Pressure: 80 psi @ 25 °C

Quality Segment

400

material

PVDF vent cap, fluoroelastomer FKM seal, mixed cellulose esters (MCE) prefilter, polycarbonate device, polypropylene support

reg. compliance

meets FDA 21 CFR 177-182 (all component materials)

sterility

non-sterile

sterilization compatibility

autoclavable compatible

product line

OptiScale® 47

feature

hydrophilic, with prefilter

manufacturer/tradename

OptiScale®

parameter

25 °C max. inlet pressure, 3.5 bar max. differential pressure (50 psid) at 25 °C, 3.5 bar max. inlet pressure (50 psi) at 25 °C, 80 psig max. inlet pressure

technique(s)

sterile filtration: suitable

filter diam.

2.7 in. (6.9 cm)

filter filtration area

17.7 cm2

impurities

≤0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction)

matrix

Multimedia Durapore®

pore size

1.2/0.2/0.22 μm pore size

bubble point

≥3450 mbar (50 psig), air with water

fitting

(19 mm (3/4 in.) Sanitary Flange Inlet and Outlet)

General description

Cartridge Type: Liquid
Device Configuration: Capsule

Preparation Note

Sterilization Method: 3 autoclave cycles of 60 min at 123 °C

Analysis Note

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥ 100 mL

Other Notes

Directions for Use
  • Organism Retention: Bacterial
  • Mode of Action: Filtration (size exclusion)
  • Application: Protein purification
  • Intended Use: Reduction or removal of microorganism/bioburden
  • Instructions for Use: Please refer installation and wetting sections of OPTISCALE®-25 user guide
  • Storage Statement: Please refer OPTISCALE®-25 user guide
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Legal Information

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

Still not finding the right product?

Explore all of our products under OptiScale® 47 Capsule Media: Milligard® 1.2 / 0.2 / 0.22 µm Nominal

Regulatory Information

新产品

This item has

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Find documentation for the products that you have recently purchased in the Document Library.

Visit the Document Library

Global Trade Item Number

SKUGTIN
SVSXA47FF304053252257803