Low alloy steel

This Standard Reference Material (SRM) is low alloy steel in the form of chips sized to pass through sieve openings between 0.50 mm and 1.18 mm (35 mesh to 16 mesh). It is intended primarily for use in evaluation of chemical and instrumental methods of analysis of steel and materials of similar matrix. It should not be used for calibration. A unit of SRM 2166 consists of one bottle containing approximately 150 g of chips. For more information, please refer to the COA and SDS.

SRM 2166_cert

SRM 2166_SDS

Certified for the analytes listed below.
Aluminum (Al), Antimony (Sb), Arsenic (As), Carbon (C), Chromium (Cr), Cobalt (Co), Copper (Cu), Lead (Pb), Manganese (Mn), Molybdenum (Mo), Nickel (Ni), Niobium (Nb), Phosphorus (P), Silicon (Si), Silver (Ag), Sulfur (S), Tin (Sn), Titanium (Ti), Vanadium (V), Sulfur (S)

Reference/Informational value is provided for the following analytes.
Boron (B), Bismuth (Bi), Magnesium (Mg), Selenium (Se), Tantalum (Ta), Tellurium (Te), Zirconium (Zr)

See certificate for values and more details at nist.gov/SRM.

NIST is a registered trademark of National Institute of Standards and Technology

SRM is a registered trademark of National Institute of Standards and Technology