00940
Formic acid
for LC-MS LiChropur™, 97.5-98.5% (T)
vapor density
1.6 (vs air)
vapor pressure
44.8 mmHg ( 20 °C)
Assay
97.5-98.5% (T)
form
liquid
autoignition temp.
1004 °F
expl. lim.
57 %
technique(s)
LC/MS: suitable
impurities
1.5-2.5% water
evapn. residue
≤0.002%
refractive index
n20/D 1.370 (lit.)
bp
100-101 °C (lit.)
mp
8.2-8.4 °C (lit.)
density
1.22 g/mL at 25 °C (lit.)
anion traces
chloride (Cl-): ≤5 mg/kg
sulfate (SO42-): ≤5 mg/kg
sulfite (SO32-): ≤10 mg/kg
cation traces
Ca: ≤1.0 mg/kg
Co: ≤0.1 mg/kg
Cr: ≤0.1 mg/kg
Cu: ≤5.0 mg/kg
Fe: ≤0.5 mg/kg
Mn: ≤0.1 mg/kg
NH4+: ≤10 mg/kg
Ni: ≤0.1 mg/kg
Pb: ≤0.1 mg/kg
Zn: ≤0.5 mg/kg
SMILES string
OC=O
InChI
1S/CH2O2/c2-1-3/h1H,(H,2,3)
InChI key
BDAGIHXWWSANSR-UHFFFAOYSA-N
Looking for similar products? Visit Product Comparison Guide
Related Categories
Legal Information
related product
Signal Word
Danger
Hazard Statements
Precautionary Statements
Hazard Classifications
Acute Tox. 3 Inhalation - Acute Tox. 4 Oral - Eye Dam. 1 - Flam. Liq. 3 - Skin Corr. 1A
Supplementary Hazards
Storage Class Code
3 - Flammable liquids
WGK
WGK 1
Flash Point(C)
49.5 °C - closed cup
Regulatory Information
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.
Difficulty Finding Your Product Or Lot/Batch Number?
How to Find the Product Number
Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).
Example:
Additional examples:
705578-5MG-PW
PL860-CGA/SHF-1EA
MMYOMAG-74K-13
1000309185
enter as 1.000309185)
Having trouble? Feel free to contact Technical Service for assistance.
How to Find a Lot/Batch Number for COA
Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.
Aldrich Products
For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').
For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').
For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.
Not Finding What You Are Looking For?
In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.
Articles
This application note describes the LC-MS-based quantitative analysis of known nitrosamine impurities following procedures 1 and 3 as given in USP general chapter <1469>.
A simplified LC-MS/MS method to determine glyphosate and related compounds using a Supel™ Carbon LC U/HPLC column for stability under higher pH conditions and sufficient retention for the polar analytes in the presence of methanol as an extraction solvent.
A step-by-step workflow for the sample preparation of hemp bud, hemp oil, chocolate, gummy, candy, and cream for the HPLC-PDA separation and analysis of 17 cannabinoids.
This article validates the ability to perform cleanup of urine samples using HLB solid-phase extraction (SPE) for the analysis of opioids via tandem mass spectrometry (LC-MS/MS) after cleanup with the Supel™ Swift HLB 96-well plate.
Related Content
FAS, or 'forever chemicals,' persist in the environment and pose risks to human health. Discover our environmental monitoring tools for PFAS quantification, aiding researchers, regulators, and labs in testing for PFAS.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service