InChI key
UAUDZVJPLUQNMU-KTKRTIGZSA-N
InChI
1S/C22H43NO/c1-2-3-4-5-6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22(23)24/h9-10H,2-8,11-21H2,1H3,(H2,23,24)/b10-9-
SMILES string
[H]\C(CCCCCCCC)=C(/[H])CCCCCCCCCCCC(N)=O
form
beads
composition
erucamide, >85%
mp
79-81 °C (lit.)
functional group
amide
storage temp.
−20°C
Quality Level
正在寻找类似产品? 访问 产品对比指南
Application
顺式-13-多科舍诺酰胺(芥酸酰胺)用作:
- 气相色谱/质谱法测定聚乙烯包装薄膜中脂肪酸酰胺的标准
- 用于聚合物的增滑剂,以降低它们的摩擦系数并使薄膜更容易处理
存储类别
11 - Combustible Solids
wgk
WGK 1
flash_point_f
Not applicable
flash_point_c
Not applicable
ppe
Eyeshields, Gloves, type ABEK (EN14387) respirator filter
Gang Lv et al.
Journal of chromatography. A, 1216(48), 8545-8548 (2009-10-28)
A new method for determination of fatty acid amides in polyethylene packaging film was developed using gas chromatography/mass spectrometry (GC/MS). Liquid extraction, Soxhlet extraction ultrasonic-assisted extraction and pressurized solvent extraction (PSE) methods were compared and the results showed that pressurized
Alvaro Garrido-López et al.
Journal of chromatography. A, 1150(1-2), 178-182 (2006-12-13)
Polymers require the use of some slip agents, such as oleamide and erucamide, in order to reduce their friction coefficient and to make films easier to handle. In this communication, three analytical methods consisting in pressurized liquid extraction (PLE) and
John Watson et al.
Journal of biomolecular screening, 14(5), 566-572 (2009-05-28)
Disposable plastic labware is ubiquitous in contemporary pharmaceutical research laboratories. Plastic labware is routinely used for chemical compound storage and during automated liquid-handling processes that support assay development, high-throughput screening, structure-activity determinations, and liability profiling. However, there is little information
Alvaro Garrido-López et al.
Journal of chromatography. A, 1124(1-2), 51-56 (2006-05-24)
A pressurized fluid extraction (PFE) and gas chromatography-flame ionization detection (GC-FID) method is proposed to determine the slip agents in polyethylene (PE) films. The study of PFE variables was performed using a fractional factorial design (FFD) for screening and a
Shilpa Y Sankhe et al.
Applied spectroscopy, 57(1), 37-43 (2003-11-13)
The diffusion of additives in thick (approximately 500 microns) single layer and multilayer films has been characterized using FT-IR microspectroscopy. The objective of this research was to investigate additive migration and concentration profiles in coextruded multilayer films of industrially relevant
我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系客户支持