InChI key
YFDLHELOZYVNJE-UHFFFAOYSA-L
InChI
1S/Hg.2HI/h;2*1H/q+2;;/p-2
SMILES string
I[Hg]I
grade
anhydrous
assay
99.999% trace metals basis
form
beads
reaction suitability
reagent type: catalyst
core: mercury
particle size
−10 mesh
bp
354 °C (lit.)
mp
259 °C (lit.)
solubility
acetone: slightly soluble(lit.), diethyl ether: slightly soluble(lit.), ethanol: slightly soluble(lit.)
正在寻找类似产品? 访问 产品对比指南
Disclaimer
For U.S. Customers: Contains mercury; Do not place in trash - dispose according to local, state, or federal laws.


signalword
Danger
Hazard Classifications
Acute Tox. 1 Dermal - Acute Tox. 2 Inhalation - Acute Tox. 2 Oral - Aquatic Acute 1 - Aquatic Chronic 1 - STOT RE 2
存储类别
6.1B - Non-combustible acute toxic Cat. 1 and 2 / very toxic hazardous materials
wgk
WGK 3
flash_point_f
Not applicable
flash_point_c
Not applicable
ppe
Eyeshields, Faceshields, Gloves, type P3 (EN 143) respirator cartridges
法规信息
新产品
此项目有
Acute renal failure associated with application of a mercuric blister in a horse.
M D Markel et al.
Journal of the American Veterinary Medical Association, 185(1), 92-94 (1984-07-01)
Health hazard from mercury soap.
E S Mucklow
Lancet (London, England), 1(8635), 448-448 (1989-02-25)
N C Sukul et al.
Homeopathy : the journal of the Faculty of Homeopathy, 91(4), 217-220 (2002-11-09)
Mercuric chloride 30c and Mercuric iodide 30c were prepared by successive dilution in 30 steps of 1:100 followed by sonication at 20KHz for 30s at each step. Both were prepared in two media: 90% ethanol and distilled water. Three preparations
Zhong Su et al.
Physics in medicine and biology, 50(12), 2907-2928 (2005-06-03)
The signal properties of polycrystalline mercuric iodide (HgI2) film detectors, under irradiation conditions relevant to mammographic, radiographic, fluoroscopic and radiotherapy x-ray imaging, are reported. Each film detector consists of an approximately 230 to approximately 460 microm thick layer of HgI2
Hyotcherl Ihee
Accounts of chemical research, 42(2), 356-366 (2009-01-02)
Most chemical reactions occur in solution, and complex interactions between solute and solvent influence the rich chemistry of these processes. To track time-dependent processes in such reactions, researchers often use time-resolved spectroscopy. In these experiments, an optical pulse (pump) initiates
我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系客户支持

