产品名称
四甲基丙烯酸酯封端的聚乙撑二氧噻吩 溶液, 0.5 wt. % (dispersion in nitromethane), contains p-toluenesulfonate as dopant
Quality Segment
mol wt
~1,360-1,600 g/mol (methacrylate equivalent weight), average Mn ~6,000
contains
p-toluenesulfonate as dopant
composition
ethanol, 5.8 wt. % , isopropanol, 0.3 wt. % , nitromethane, 93.4 wt. % , Oligotron™ tetramethacrylate, 0.5 wt. %
concentration
0.5 wt. % (dispersion in nitromethane)
resistance
1-10 M Ω/sq (surface resistance of film)
conductivity
0.1-0.5 S/cm (bulk)
density
1.127 g/mL at 25 °C
General description
请单击此链接查阅 Aedotron/Oligotron 选择指南表。
Application
Poly(3,4-ethylenedioxythiophene), tetramethacrylate end-capped solution (PEDOT-TMA) can be used as a hole injection layer (HIL) which can be used in optoelectronic applications such as light emitting diodes (LEDs), biosensors, and energy storage devices.
使用前搅拌 20 分钟可获得最佳的性能。具体的旋涂过程为:以 500RPM 旋转 9 秒后,再以 1500RPM 旋转 15 秒。通过向硝基甲烷分散剂中添加丙烯酸酯单体和光引发剂(如 DMPA)可制备光固化墨水。进行交联反应前,必须将溶液浓缩。功能性化合物可以通过与甲基丙烯酸酯基团反应偶联至低聚物。
Suitable for spin coating applications.
Used for depositing thin films of conducting EDOT oligomers for sensors, antistatic layers, organic solar cells and flexible electronics.
Features and Benefits
封端结构使得导电低聚物 PEDOT 可分散。甲基丙烯酸酯基团为交联或进一步化学修饰提供可能。另外硝基甲烷的挥发性也使其适用于旋涂。
Legal Information
Oligotron is a trademark of TDA Research, Inc.
Disclaimer
请在室温下保存本品(切勿冷冻或冷藏)。如果产品出现少许沉淀,属于正常现象。使用前,请搅拌、超声并过滤。可在移液管前端填充玻璃棉,用于简易过滤。未按照要求保存本品,将严重缩短本品的保质期。如果产品发生严重的聚合反应,或如果产品经超声/过滤后仍无法达到良好的铸膜溶液条件,则不应继续使用。
Still not finding the right product?
Explore all of our products under 四甲基丙烯酸酯封端的聚乙撑二氧噻吩 溶液
signalword
Warning
Hazard Classifications
Acute Tox. 4 Inhalation - Acute Tox. 4 Oral - Carc. 2 - Flam. Liq. 3 - Repr. 2
存储类别
3 - Flammable liquids
wgk
WGK 2
flash_point_f
96.8 °F - closed cup
flash_point_c
36 °C - closed cup
ppe
Eyeshields, Faceshields, Gloves, type ABEK (EN14387) respirator filter


