产品名称
过硫酸钠, low endotoxin
InChI
1S/2Na.H2O8S2/c;;1-9(2,3)7-8-10(4,5)6/h;;(H,1,2,3)(H,4,5,6)/q2*+1;/p-2
SMILES string
[Na+].[Na+].[O-]S(=O)(=O)OOS([O-])(=O)=O
InChI key
CHQMHPLRPQMAMX-UHFFFAOYSA-L
storage temp.
2-8°C
Quality Level
正在寻找类似产品? 访问 产品对比指南
Application
Sodium persulfate is provided at an optimized concentration for 3D bioprinting applications. It can be used to bioprint via extrusion based 3D bioprinting cell-laden hydrogels in desired shapes and without any supporting materials. Crosslinking of the 3D printed structures is done in one step using visible light. The crosslinked cell-laden bioinks can be further culutred and use for tissue engineering and regenerative medicina applications.
Low Endotoxin, low bioburden: Endotoxins have been demonstrated negatively impact cellular growth, morphology, differentiation, inflammation and protein expression. Bioburden is defined as the number of contaminated organisms found in a given amount of material. We test each lot for endotoxins as well as total bioburden (aerobic and fungal) to minimize unwanted interactions. For more information: https://www.sigmaaldrich.com/US/en/technical-documents/technical-article/microbiological-testing/pyrogen-testing/what-is-endotoxin
Low Endotoxin, low bioburden: Endotoxins have been demonstrated negatively impact cellular growth, morphology, differentiation, inflammation and protein expression. Bioburden is defined as the number of contaminated organisms found in a given amount of material. We test each lot for endotoxins as well as total bioburden (aerobic and fungal) to minimize unwanted interactions. For more information: https://www.sigmaaldrich.com/US/en/technical-documents/technical-article/microbiological-testing/pyrogen-testing/what-is-endotoxin
General description
Rutheneum (Ru) and sodium persulfate (SPS) have the ability to effectively generate free radicals in the 400-450nm visible light range, allowing for cell-friendly photo-crosslinking of a variety of hydrogels. Among the materials that can be crosslinked via this method are the natturally derived and biocompatible biomaterials silk fibroin and gelatin . These materials can be used to enhance the mechanical and rheological properties to aid the 3D bioprinting workflow.
Legal Information
Tissuefab is a registered trademark of Sigma-Aldrich Co. LLC
TISSUEFAB is a registered trademark of Merck KGaA, Darmstadt, Germany
signalword
Danger
hcodes
Hazard Classifications
Ox. Liq. 3 - Resp. Sens. 1 - Skin Sens. 1
存储类别
5.1B - Oxidizing hazardous materials
wgk
nwg
flash_point_f
Not applicable
flash_point_c
Not applicable
Khoon S Lim et al.
Macromolecular bioscience, 19(6), e1900098-e1900098 (2019-04-27)
In this study, the cyto-compatibility and cellular functionality of cell-laden gelatin-methacryloyl (Gel-MA) hydrogels fabricated using a set of photo-initiators which absorb in 400-450 nm of the visible light range are investigated. Gel-MA hydrogels cross-linked using ruthenium (Ru) and sodium persulfate
Soon Hee Kim et al.
Nature communications, 9(1), 1620-1620 (2018-04-26)
Although three-dimensional (3D) bioprinting technology has gained much attention in the field of tissue engineering, there are still several significant engineering challenges to overcome, including lack of bioink with biocompatibility and printability. Here, we show a bioink created from silk
我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系客户支持