描述
(application(s): tissue engineering, 3d bioprinting)
相容性
(extrusion-based 3D bioprinting, cell culture)
储存温度
room temp
一般描述
Rethink your bioinks with TissueFab®
About the material:
These TissueFab(R) bioink mixing kit, complete pack includes:
* 1 Cell mixer dispenser
* 1 mL syring
* 1 3mL syringe
* 1 connector and tubing
* 1 mixing head
Additional materials you will need:
*TissueFab(R) xeno-free bioink
*Cell suspension in culture medium
*Your bioprinter cartridge
*TissueFab(R) cell mixer dispenser
Combining cells with a bioink is a crucial stage in 3D bioprinting. However, the varying viscosities of the cell suspension and bioink can result in the formation of numerous air bubbles and non-uniform mixing when using traditional manual mixing methods. This can lead to the creation of unstable printed structures, making post-printing cell observation challenging and potentially impacting cell viability adversely. The TissueFab(R) Bioink Mixer and Mixing Component Kits enable you to uniformally mix your bioink and cells.
This complete pack for the bioink mixing kit is suitable for preparing TissueFab(R) xeno-free bioinks, allowing for a 3:1 mixing ratio using the 3mL syringe or a 10:1 mixing ratio using the 1mL syringe. To prepare the bioprinter cartridge, the TissueFab(R) xeno-free bioink and cell suspension are placed in the cell mixer and dispensed through the connector and mixing head to create a uniform bioink solution. After waiting 10-20 minutes for the mixture to stabilize, the cartridge is ready for printing. No UV, temperature/pH curing, or chemical crosslinking is required. Additionally, the addition of cell culture medium can further stabilize and support cell growth.
The syringe, connector, and mixing head are disposable for one-time use to ensure consistent and reliable results. Sterilized replacement mixing kit components are available for purchase.
More information and a step by step protocol can be found under the "More Documents" section of this page.
About the material:
These TissueFab(R) bioink mixing kit, complete pack includes:
* 1 Cell mixer dispenser
* 1 mL syring
* 1 3mL syringe
* 1 connector and tubing
* 1 mixing head
Additional materials you will need:
*TissueFab(R) xeno-free bioink
*Cell suspension in culture medium
*Your bioprinter cartridge
*TissueFab(R) cell mixer dispenser
Combining cells with a bioink is a crucial stage in 3D bioprinting. However, the varying viscosities of the cell suspension and bioink can result in the formation of numerous air bubbles and non-uniform mixing when using traditional manual mixing methods. This can lead to the creation of unstable printed structures, making post-printing cell observation challenging and potentially impacting cell viability adversely. The TissueFab(R) Bioink Mixer and Mixing Component Kits enable you to uniformally mix your bioink and cells.
This complete pack for the bioink mixing kit is suitable for preparing TissueFab(R) xeno-free bioinks, allowing for a 3:1 mixing ratio using the 3mL syringe or a 10:1 mixing ratio using the 1mL syringe. To prepare the bioprinter cartridge, the TissueFab(R) xeno-free bioink and cell suspension are placed in the cell mixer and dispensed through the connector and mixing head to create a uniform bioink solution. After waiting 10-20 minutes for the mixture to stabilize, the cartridge is ready for printing. No UV, temperature/pH curing, or chemical crosslinking is required. Additionally, the addition of cell culture medium can further stabilize and support cell growth.
The syringe, connector, and mixing head are disposable for one-time use to ensure consistent and reliable results. Sterilized replacement mixing kit components are available for purchase.
More information and a step by step protocol can be found under the "More Documents" section of this page.
应用
This bioink mixing kit can be used to mix the of TissueFab® xeno-free bioinks with cells for optimized 3D bioprinting for a variety of applications such as tissue engineering, regenerative medicine, and in vitro modeling.
特点和优势
Key Features and Benefits:
Each TissueFab(R) material is developed and tested to meet strict criteria to best suit researchers′ needs. The bioink mixing kit greatly improves the mixing of cells and bioinks for a better 3D bioprinting experience and optimal 3D bioprinted tissue constructs.
Each TissueFab(R) material is developed and tested to meet strict criteria to best suit researchers′ needs. The bioink mixing kit greatly improves the mixing of cells and bioinks for a better 3D bioprinting experience and optimal 3D bioprinted tissue constructs.
法律信息
TISSUEFAB is a registered trademark of Merck KGaA, Darmstadt, Germany
VitroINK is a registered trademark of TheWell Bioscience Inc.
法规信息
新产品
此项目有
MP01-03 Xeno-Free Peptide-Functionalized Bioinks Improve Ex Vico Culture of Human Testicular Tissues
Robinson M., et al
The Journal of Urology, 4, 209-209 (2023)
First tests of extrusion Process Using Arthroscopic 3D Bioprinting Handheld Tools Prototypes
Gapinski T, el al
Biomaterials, 158, 60-60 (2020)
Polysaccharide hydrogel based 3D printed tumor models for chemotherapeutic drug screening.
Gebeyehu A, et al.
Scientific Reports, 11, 372-372 (2021)
我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系客户支持