Quality Segment
description
Printable Material: ITO, Glass, Kapton, Resistivity: 2 -7 x of bulk gold depending on T/time, Solvent: Non-polar solvent formulations, Surfactant: Oleylamine
form
liquid
concentration
62-72%
particle size
~3-5 nm
viscosity
~7-10 cP
storage temp.
2-30°C
Application
Our gold nanoink is a general-use ink for Ink-Jet printing on variety of substrates. The ink is based on gold nanoparticles with average size around 4 nm and dispersed in liquid vehicle. Since it is surface stabilized, ink is highly soluble in nonpolar organic solvent and stable under atmospheric conditions at room temperature.
Preparation Note
General recommendation: Stored under inert atmosphere curing temperature: >~200 - 400oC
Other Notes
FAQs: Q1: What adjustments can improve sintering results, especially with older ink? Answer: Try increasing the sintering duration or slightly raising the temperature. These adjustments can enhance results when using older ink.
Q2: How does storage duration affect the ink’s condition? Answer: If the ink has been stored for around seven months, its condition can vary depending on how it was stored.
Q3: Is ink still usable after being refrigerated for several months? Answer: Yes, refrigerated ink is generally still usable. However, it may require longer or higher-temperature sintering to achieve optimal performance.
Q4: What can be done if the ink contains bulk material? Answer: You can centrifuge the ink at a low speed (around 500 rpm) to help remove any bulk material.
Q5: What degradation risks are there if the ink was not sealed or sparged?
Answer: Without proper sealing or sparging (using Argon or Nitrogen), the ink may degrade over time. This could result in reduced concentration. Centrifuging can help, but performance may still be affected.
Q6: What is the recommended storage method for ink kept longer?
Answer: Sparge the ink with Argon or Nitrogen and seal it with electrical tape to preserve quality during extended storage. For best results, sparging the bottle with argon to displace oxygen and moisture is recommended, along with ensuring a secure seal. Periodically inverting the bottle to remix the contents helps maintain uniformity and prevents settling.
Q2: How does storage duration affect the ink’s condition? Answer: If the ink has been stored for around seven months, its condition can vary depending on how it was stored.
Q3: Is ink still usable after being refrigerated for several months? Answer: Yes, refrigerated ink is generally still usable. However, it may require longer or higher-temperature sintering to achieve optimal performance.
Q4: What can be done if the ink contains bulk material? Answer: You can centrifuge the ink at a low speed (around 500 rpm) to help remove any bulk material.
Q5: What degradation risks are there if the ink was not sealed or sparged?
Answer: Without proper sealing or sparging (using Argon or Nitrogen), the ink may degrade over time. This could result in reduced concentration. Centrifuging can help, but performance may still be affected.
Q6: What is the recommended storage method for ink kept longer?
Answer: Sparge the ink with Argon or Nitrogen and seal it with electrical tape to preserve quality during extended storage. For best results, sparging the bottle with argon to displace oxygen and moisture is recommended, along with ensuring a secure seal. Periodically inverting the bottle to remix the contents helps maintain uniformity and prevents settling.
signalword
Danger
Hazard Classifications
Aquatic Acute 1 - Aquatic Chronic 1 - Asp. Tox. 1 - Eye Irrit. 2 - Flam. Liq. 3 - Skin Irrit. 2 - Skin Sens. 1
存储类别
3 - Flammable liquids
flash_point_f
125.6 °F
flash_point_c
52 °C