sustainability
Sustainability features
diam.
1.75 mm
weight
500 geach
General description
This product aligns with one or more of the 12 Principles of Green Chemistry. This product aligns with the Green Chemistry Principle "Design for energy efficency". Carbon reinforced ABS 3D printing filament has high tensile strength and low thermal expansion. Click here for more information.
TPU Flexible 3D Printing Filament
Material Properties
- TPUs are highly resistant to chemical agents, wear-proof and have good elastic comeback.
- Flexmark 7 = 70 Shore A, the most flexible, but it requires a precise calibration of the printer.
- Flexmark 8 = 80 Shore A, a good mixture of flexibility and stiffness and easier to print.
- Flexmark 9 = 90 Shore A, the stiffest of all the Flexs and lets you print as usual.
Material Properties
- Density: 1.24 g/cm3
- Hardness: 93 sh/A
- Elongation at break: 600%
- Tensile strain: 55 MPa
- Compression set at 70 °C: 45%
- Charpy Impact at 23 °C: No break
- Charpy Impact at -30 °C: No break
- Abrasion loss: 30 mm3
Application
Flexmark 9 TPU 3D Printing Parameters
- Extruder (nozzle) temperature: 225 +/-10 °C
- Bed temperature: cold to 45 °C
- Print speed: 25-35 mm/s
- Fan: 0-50 %
- Minimum nozzle diameter: 0.3 mm
- Plate materials: glass, blue tape, kapton tape, etc.
This product can be used in material extrusion 3D printing technique.
存储类别
11 - Combustible Solids
WGK
WGK 3
闪点 (F)
Not applicable
闪点 (°C)
Not applicable