AC/DC input
120 V AC
feature
CSA approved
availability
not available in EU
weight
1.6 lb
General description
Model SS-4 has a cast aluminum case with gray, baked-on finish, satin SS face plate with flush-mounted receptacle and dial plate, pilot lamp and a 3 ft, 3-wire power cord with U.S. plug.
Used to control THERMOWELL heating mantles or other resistive heating circuits (hot plates, heat tapes, water baths, etc). Available in solid-state or proportional on/off models. All models are fused (without circuit breakers). Calibrated in terms of percent power level from 5 to 90% (i.e. when knob is set at 50% power level, 83 volts are delivered if the line voltage is 117). Offers a wider range of control than proportional on/off type. In addition to resistive heating circuits, may be used to control incandescent lamps, room fans, stirring motors. 60 Hz.
Legal Information
POWERMITE is a trademark of Laboratory Craftsmen, Inc.
Still not finding the right product?
Explore all of our products under POWERMITE™ solid-state type-600W capacity heat controls