material
polypropylene filter, silicone seal
feature
hydrophilic
manufacturer/tradename
Polygard
parameter
4.8 bar max. differential pressure (70 psid) at 25 °C, 4.8 bar max. inlet pressure (70 psi) at 25 °C
cartridge nominal length
10 in. (25 cm)
filter diam.
2.75 in. (7 cm)
filter filtration area
0.42 m2
impurities
≤0.5 EU/mL bacterial endotoxins (LAL test, aqueous extraction)
pore size
1.2 μm pore size
cartridge code
Code F
General description
Cartridge Type: Liquid
Device Configuration: Cartridge
Polygard® CN products are nominally rated filters designed for particle removal applications in liquids and gases. The pleated structure of Polygard® CN filter media minimizes pressure differentials during the filtration process, and the all-polypropylene construction of these filters conveys low levels of extractables and broad chemical compatibility. Downstream filter performance is enhanced due to efficient particle and microorganism reduction.
Preparation Note
Sterilization Method:
10 autoclave cycles or SIP at 126°C for 30min
10 autoclave cycles or SIP at 126°C for 30min
Analysis Note
Gravimetric Extractables: ≤ 20mg after 24-h soak in water
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5L
Other Notes
Directions for Use:
- Organism Retention: Microorganism reduction
- Mode of Action: Filtration (nominal)
- Application: BioProcessing
- Intended Use: Efficient particle and microorganism reduction
- Instructions for Use: Please refer to the Polygard® and Clarigard® Cartridges user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations
Legal Information
CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
Still not finding the right product?
Explore all of our products under Polygard® CN筒式滤芯