跳转至内容
Merck
CN

KGW3A3THH1

Polysep™ II 1.0/0.2 µm nominal, Opticap® XLT Capsule

Opticap® XLT 30, inlet connection diam. 5/8 in., pore size 1.0/0.2 μm, cartridge nominal length 30 in. (75 cm)

别名:

Opticap XLT30 Polysep II 1.0/0.2 μm 5/8 in. HB, Opticap XLT 30 CapsuleMedia: Polysep II 1.0 / 0.2 µm Nominal

登录 查看组织和合同定价。

选择尺寸

关于此项目

eCl@ss:
32031610
UNSPSC Code:
23151806

主要文件

查看所有文档
技术服务
需要帮助？我们经验丰富的科学家团队随时乐意为您服务。
让我们为您提供帮助
技术服务
需要帮助？我们经验丰富的科学家团队随时乐意为您服务。
让我们为您提供帮助

产品名称

Polysep™ II 1.0/0.2 µm nominal, Opticap® XLT Capsule, Opticap® XLT 30, Chemistry: Mixed Cellulose Esters (MCE)Inlet: 5/8 in. Hose BarbOutlet: 5/8 in. Hose BarbT-lineMax Operating Pressure: 80 psi @ 25 °C, inlet connection diam. 5/8 in., pore size 1.0/0.2 μm, cartridge nominal length 30 in. (75 cm)

material

borosilicate glass fiber (BGF) membrane, mixed cellulose esters (MCE) membrane, polypropylene , polypropylene housing, polypropylene support, polypropylene vent cap, silicone seal

reg. compliance

meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)

Quality Level

400

sterility

non-sterile

sterilization compatibility

autoclavable compatible

product line

Opticap® XLT 30

feature

hydrophilic

manufacturer/tradename

Opticap®

parameter

1.0 bar max. inlet pressure (15 psi) at 80 °C, 2.75 bar max. inlet pressure (40 psi) at 60 °C, 25 °C max. inlet temp., 3.5 bar max. differential pressure (50 psid) at 25 °C, 5.5 bar max. inlet pressure (80 psi) at 23 °C, 80 psig max. inlet pressure

technique(s)

prefiltration: suitable

L

87.1 cm (34.3 in.)

cartridge nominal length

30 in. (75 cm)

filtration area

1.38 m2

inlet connection diam.

5/8 in.

inlet to outlet W

19.8 cm (7.8 in.)

outlet connection diam.

5/8 in.

impurities

≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction), <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)

gravimetric extractables

≤435 mg/capsule

matrix

Polysep™ II

pore size

1.0/0.2 μm nominal pore size, 1.0/0.2 μm pore size

input

sample type liquid

fitting

inlet hose barb, outlet hose barb, (16 mm (5?8 in.) Hose Barb Inlet and Outlet)

正在寻找类似产品? 访问 产品对比指南

相关类别

General description

Device Configuration: Capsule
T-line/Gauge Port: T-line

Features and Benefits

Format: Double Layer

Packaging

Double Easy-Open bag

Preparation Note

Sterilization Method
3 autoclave cycles of 30 min @ 121 °C; not in-line steam sterilizable
This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Analysis Note

Gravimetric Extractables: after a 15 L flush and 24 hours in water at controlled room temperature
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥15 L

Other Notes

Directions for Use:
  • Organism Retention: Microorganism
  • Mode of Action: Filtration (size exclusion)
  • Application: BioProcessing
  • Intended Use: Reduction or removal of microorganism/bioburden
  • Instructions for Use: Please refer to the first page of Visual Inspection Guide and introduction section of the Mixed cellulose esters Tech Brief
  • Storage Statement: Please refer to the Mixed cellulose esters Tech Brief
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Legal Information

OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany
Polysep is a trademark of Sigma-Aldrich Co. LLC

存储类别

11 - Combustible Solids

wgk

WGK 2

法规信息

新产品
此项目有

分析证书(COA)

输入产品批号来搜索 分析证书(COA) 。批号可以在产品标签上"批“ （Lot或Batch）字后找到。

已有该产品？

在文件库中查找您最近购买产品的文档。

访问文档库

我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.

联系客户支持