KN12A3TTT1
Opticap XLT 30" Polygard CN 1.2 um 1.5" TC/TC 1 件装
inlet connection diam. 1.5 in., pore size 1.2 μm, cartridge nominal length 30 in. (75 cm)
别名:
Opticap® XLT30 Polygard过滤器®
登录查看公司和协议定价
About This Item
UNSPSC代码:
23151806
eCl@ss:
32031690
物料
polypropylene
polypropylene housing
polypropylene support
polypropylene vent cap
silicone seal
质量水平
管理合规性
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
制造商/商品名称
Opticap®
参数
25 °C max. inlet temp.
80 psig max. inlet pressure
纯化柱标称长度
30 in. (75 cm)
入口接头直径
1.5 in.
出口接头直径
1.5 in.
杂质
≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
<0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
重量萃取物
≤165 mg/capsule
一般描述
Device Configuration: 取样皿滤膜
T-line/Gauge Port: T-line
特点和优势
Format: Single Layer
包装
Double Easy-Open bag
制备说明
Sterilization Method
3 autoclave cycles of 30 min @ 126 °C; not in-line steam sterilizable
3 autoclave cycles of 30 min @ 126 °C; not in-line steam sterilizable
分析说明
Gravimetric Extractables: after 24 hours in water at controlled room temperature
其他说明
Directions for Use
- Organism Retention: Microorganism reduction
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer installation section of OPTICAP® XL Capsules and OPTICAP® XLT Capsules user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
法律信息
OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany
POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系客户支持