PEZGS0816
Millicell® EZ载玻片
8-well glass chamber slide, 0.7 cm2/well, 16/pk, sterile
别名:
8孔载玻片, 细胞培养玻片
登录 查看组织和合同定价。
选择规格
变更视图
关于此项目
UNSPSC Code:
41104923
NACRES:
NB.22
eCl@ss:
32011202
Material:
polypropylene wells, soda-lime glass slide
Sterility:
ethylene oxide treated, sterile
Packaging:
box of 16 units (4 trays, 4 units/tray)
Quality Segment
material
polypropylene wells, soda-lime glass slide
sterility
ethylene oxide treated, sterile
feature
Raised corner ridges on the lid facilitate stacking of multiple units
packaging
box of 16 units (4 trays, 4 units/tray)
manufacturer/tradename
Millicell®
technique(s)
cell based assay: suitable, cell culture | mammalian: suitable, immunocytochemistry: suitable
H
13.9 mm , excluding lid, 16.2 mm , including lid
L × W × H
75 mm × 25 mm × 1 mm, slide dimensions
L
77.8 mm
W
33.8 mm
size
8 wells
well surface area
0.7 cm2
well volume
200-700 μL
shipped in
ambient
storage temp.
10-30°C
General description
Millicell® EZ 玻片允许用户在显微镜载玻片上直接生长、固定和染色细胞。分析之前，不需要拆卸单元或将细胞从一个设备转移到另一个设备。聚丙烯孔可以抵抗大多数固定剂，因此细胞可以在载玻片上生长，并在孔中染色。染色后，显微镜载玻片可以轻松去除，只需按下单元的四个侧面标签，将孔板从载玻片上提起即可。这种简单的载玻片移除降低了损坏细胞的风险，不需要专用工具将孔板从载玻片移除。盖板上的凸角便于在培养箱中堆叠多个单元，或者可以在随附的托盘中进行培养。
Preparation Note
- 根据首选方案培养、固定和染色细胞。
- 为了获得显微镜载玻片，将Millicell® EZ SLIDE放在一个平坦的表面上，用拇指将四个标签压破。拆下盖子。按住载玻片，向上提起孔板，以便取出。从支架上拆下载玻片。
Legal Information
Millicell is a registered trademark of Merck KGaA, Darmstadt, Germany
Still not finding the right product?
Explore all of our products under Millicell® EZ载玻片