material
PTFE membrane, polypropylene housing
sterility
non-sterile
product line
Millex™
quality
MQ400
manufacturer/tradename
Millex™
parameter
at ≥0.8 bar and 23 °C (bubble point; air with methanol), max. inlet pressure (125 psi), max. pressure at 8.6 bar, 45 °C temperature (maximum)
technique(s)
UHPLC: suitable, analytical sample preparation: suitable, gas filtration: suitable, vent filtration: suitable
H
27 mm
diam.
33 mm
filter area
4.5 cm2
volume
100 mL
color
red
pore size
0.2 μm
input
sample type organic solution(s)
gas
fitting
(Female Luer-Lok inlet,
male Luer-slip outlet)
application(s)
cannabis testing
General description
Non-sterile Millex™-FG Syringe Filters with 0.2 micron Hydrophobic PTFE Membrane are specificaly designed for the efficient filtration of organic solvents
- Hydrophobic PTFE Membrane: Offers broad solvent compatibility
- Polypropylene Housing: Provides low extractables and excellent chemical compatibility
- Easy Identification: Membrane type and pore size are clearly printed on the filter for quick reference. A red band identifies non-sterile Millex™ filters with hydrophobic PTFE membrane
- Recommended Sample Volume: Designed for filtering 10-100 milliliter (mL) volumes to effectively remove particulates prior to instrumentation analysis
Replaces SLFG025 25mm 0.20 μm hydrophobic PTFE Millex syringe filter. SLFG033 provides faster filtration of samples in organic solvents as compared to 25mm 0.20 μm hydrophobic PTFE syringe filters.
Other Notes
For general laboratory use only
Legal Information
Fluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a trademark of Merck KGaA, Darmstadt, Germany
Still not finding the right product?
Explore all of our products under Millex™ hydrophobic PTFE syringe filter