SLFGNR25VS
Millex™ hydrophobic PTFE syringe filter
pore size 0.2 μm, diam. 25 mm, sterile, outlet needle (18 gauge)
别名:
Millex™- Vent with Needle, Millex™-25 0.2 µm Hydrophobic Vent Filter Unit, vent filter, vial vent
登录 查看组织和合同定价。
选择尺寸
变更视图
关于此项目
NACRES:
NB.24
UNSPSC Code:
41104922
Pore size:
0.2 μm
Diam.:
25 mm
Sterility:
ethylene oxide treated, sterile
Material:
PTFE membrane, PVC housing, polypropylene cap, stainless steel needle
Packaging:
pack of 25 ea
Quality Level
material
PTFE membrane, PVC housing, polypropylene cap, stainless steel needle
sterility
ethylene oxide treated, sterile
product line
Millex™
shelf life
3 yr
feature
hydrophobic
packaging
pack of 25 ea
manufacturer/tradename
Millex™
technique(s)
gas filtration: suitable, sterile filtration: suitable, vent filtration: suitable
diam.
25 mm
filtration area
4 cm2
housing diam.
28 mm
inlet to outlet H
61 mm
needle O.D.
1.2 mm
volume
100 mL
matrix
Fluoropore®
pore size
0.2 μm
input
gas
mild organic solvent(s)
fitting
female Luer-Lok® inlet, outlet needle (18 gauge)
General description
The bidirectionally supported Millex™-FG syringe filter with needle is a sterilizing filter for gases and liquids that are not compatible with standard membrane filters. It will remove microorganisms, particles, precipitates, and undissolved powders larger than 0.2 micron (μm).
Application
Sterile venting of vials and bottles up to 2 liters. Syringe Filter for sterile filtration of alcohols, concentrated acids and bases, and air or gas
Biochem/physiol Actions
Materials
Membrane: Hydrophobic Fluoropore® polytetrafluoroethylene (PTFE), type FG
Pore size: 0.2 μm
Housing: Polyvinyl chloride (PVC) Needle: Stainless steel
Dimensions
Inlet to outlet: 61 mm (2.4 in.) including needle
Diameter: 28 mm (1.1 in.)
Filtration area: 4 cm2 (0.62 in2)
Temperature Limit: 45 °C (113 °F)
Maximum inlet pressure: 2 bar (29 psi)
Sterilization method: Ethylene oxide gas
Connections: Female Luer-Lok® inlet, male Luer-slip outlet with needle
Color: blue inlet, blue outlet
Membrane: Hydrophobic Fluoropore® polytetrafluoroethylene (PTFE), type FG
Pore size: 0.2 μm
Housing: Polyvinyl chloride (PVC) Needle: Stainless steel
Dimensions
Inlet to outlet: 61 mm (2.4 in.) including needle
Diameter: 28 mm (1.1 in.)
Filtration area: 4 cm2 (0.62 in2)
Temperature Limit: 45 °C (113 °F)
Maximum inlet pressure: 2 bar (29 psi)
Sterilization method: Ethylene oxide gas
Connections: Female Luer-Lok® inlet, male Luer-slip outlet with needle
Color: blue inlet, blue outlet
Features and Benefits
- Single use only
- Broad chemical compatibility
- Non-pyrogenic and non-toxic
Legal Information
Fluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a trademark of Merck KGaA, Darmstadt, Germany