Quality Segment
material
Nylon membrane, polypropylene housing
agency
suitable for DIN 38407-42, suitable for EPA OTM-45
reg. compliance
suitable for FDA C-010.02
sterility
non-sterile
product line
Millex™
feature
holdup volume≤ 15 μL (after air purge), hydrophilic
manufacturer/tradename
Millex™
parameter
10 bar max. inlet pressure (150 psi), 18 L/min flow rate, 18 mL/min-cm2 water flow rate, 45 °C max. temp.
technique(s)
UHPLC: suitable, analytical sample preparation: suitable
H
21 mm
diam.
13 mm
filtration area
0.8 cm2
volume
10 mL
color
purple
pore size
0.2 μm
input
sample type mild organic solution(s)
sample type aqueous solution(s)
sample type organic solution(s)
bubble point
≥3.0 bar, air with water at 23 °C
fitting
female Luer-Lok® inlet, male Luer outlet slip
application(s)
PFAS testing
shipped in
ambient
General description
带有尼龙膜的未灭菌 Millex™ 针头式过滤器概述:
•带有亲水性尼龙膜的未灭菌 Millex 针头式过滤器可与多种溶剂兼容
•提供 0.20 µm 和 0.45 µm 的孔径和两个直径,以满足您的应用需求
•与水溶液和有机溶液兼容,在实验室中提供广泛的化学相容性和灵活性
•聚丙烯外壳,可萃取物含量低,化学相容性广
提供多种包装尺寸:
以 NS(-------NS)结尾的 SKU:50 个/包
以 NL(------- NL)结尾的 SKU:100 个/包
以 TL(------- TL)结尾的 SKU:100 个/包这些针头式过滤器有一个管出口
以 NB(------- Nb)结尾的 SKU:250 个/包
以 NK(------- NK)结尾的 SKU:1000 个/包
应用:
在进行 UHPLC、HPLC、LC-MS 和质谱分析之前进行样品过滤;溶剂过滤;澄清水溶液和有机溶液
•带有亲水性尼龙膜的未灭菌 Millex 针头式过滤器可与多种溶剂兼容
•提供 0.20 µm 和 0.45 µm 的孔径和两个直径,以满足您的应用需求
•与水溶液和有机溶液兼容,在实验室中提供广泛的化学相容性和灵活性
•聚丙烯外壳,可萃取物含量低,化学相容性广
提供多种包装尺寸:
以 NS(-------NS)结尾的 SKU:50 个/包
以 NL(------- NL)结尾的 SKU:100 个/包
以 TL(------- TL)结尾的 SKU:100 个/包这些针头式过滤器有一个管出口
以 NB(------- Nb)结尾的 SKU:250 个/包
以 NK(------- NK)结尾的 SKU:1000 个/包
应用:
在进行 UHPLC、HPLC、LC-MS 和质谱分析之前进行样品过滤;溶剂过滤;澄清水溶液和有机溶液
Features and Benefits
仅供一般实验室使用
Legal Information
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a trademark of Merck KGaA, Darmstadt, Germany