SLGVVR255F
Millex™ PVDF syringe filter
pore size 0.22 μm, diam. 25 mm, sterile, hydrophilic, vented
别名:
Vented Millex™-GV 0.22 µm Filter Unit, Vented Millex™-GV Filter Unit, vented syringe filter, domed filter, syringe filter, low-binding filter
登录 查看组织和合同定价。
选择尺寸
变更视图
关于此项目
NACRES:
NB.24
UNSPSC Code:
41104922
Pore size:
0.22 μm
Diam.:
25 mm
Sterility:
ethylene oxide treated, sterile
Material:
PVC housing, PVDF membrane
Packaging:
pack of 50 ea
Quality Level
material
PVC housing, PVDF membrane
sterility
ethylene oxide treated, sterile
product line
Millex™
shelf life
3 yr
feature
hydrophilic, vented
packaging
pack of 50 ea
manufacturer/tradename
Millex™
technique(s)
low protein-binding filtration: suitable, sterile filtration: suitable
diam.
25 mm
filtration area
4 cm2
housing diam.
29 mm
inlet to outlet H
27 mm
volume
100 mL
matrix
Durapore®
pore size
0.22 μm
input
aqueous solution(s)
bubble point
≥50 psi, water
fitting
female Luer-Lok® inlet, male Luer outlet slip
General description
Vented Millex™-GV filter units are syringe filters for sterilization of low volume aqueous solutions where venting and low protein-binding membrane is desired.
Application
Syringe filter for vented sterile filtration of low volume aqueous solutions
Biochem/physiol Actions
Materials
Filter membrane: Hydrophilic Durapore® polyvinylidene fluoride (PVDF), pore size 0.22 μm, type GV
Vent membrane: Hydrophobic polytetrafluoroethylene (PTFE), pore size 0.03 μm
Housing: Polyvinyl chloride (PVC)
Dimensions
Inlet to outlet: 27 mm (1.06 in.)
Diameter: 29 mm (1.14 in.)
Filtration area: 4 cm2 (0.62 in2) Temperature limit: 45 °C (113 °F)
Pressure limit at 21 °C: 5.1 bar (75 psi) inlet and differential
Filtration volume: 1–100 mL
Hold-up volume: ≤ 0.1 mL after air purge (typical volume when vent hole is covered to prevent air flow)
Sterilization method: Ethylene oxide gas
Connections Female Luer-Lok® inlet, male Luer-slip outlet
Flow rate at 2.1 bar (30 psi), 21 °C: ≥ 40 mL/min
Bubble point (water): ≥ 50 psi
Color: clear inlet, yellow outlet
Filter membrane: Hydrophilic Durapore® polyvinylidene fluoride (PVDF), pore size 0.22 μm, type GV
Vent membrane: Hydrophobic polytetrafluoroethylene (PTFE), pore size 0.03 μm
Housing: Polyvinyl chloride (PVC)
Dimensions
Inlet to outlet: 27 mm (1.06 in.)
Diameter: 29 mm (1.14 in.)
Filtration area: 4 cm2 (0.62 in2) Temperature limit: 45 °C (113 °F)
Pressure limit at 21 °C: 5.1 bar (75 psi) inlet and differential
Filtration volume: 1–100 mL
Hold-up volume: ≤ 0.1 mL after air purge (typical volume when vent hole is covered to prevent air flow)
Sterilization method: Ethylene oxide gas
Connections Female Luer-Lok® inlet, male Luer-slip outlet
Flow rate at 2.1 bar (30 psi), 21 °C: ≥ 40 mL/min
Bubble point (water): ≥ 50 psi
Color: clear inlet, yellow outlet
Features and Benefits
- For research use only (RUO)
- Single use only
- Low protein binding
- Vented inlet to prevent air locking
- Non-pyrogenic and non-toxic
Legal Information
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a trademark of Merck KGaA, Darmstadt, Germany
法规信息
新产品
此项目有
商品
Select the right sterile filter by media, volume, and application.