Quality Level
material
molded polyetherimide (21 CFR part 177.1595), platinum cured silicone seal (21 CFR part 177.2600)
sterility
non-sterile
product line
Lynx®
parameter
temperature (SIP : 4X at 145°C /293°F for 30 min. Closed), 0.7 bar max. pressure (10 psi) (during actuation), 23 L/min flow rate at 0.6 bar (9 psi), 38 L/min flow rate at 1.8 bar (26 psi), 4-80 °C operating temperature (39-176 °F), 6.8 bar max. pressure (100 psi) (operating pressure), 8 L/min flow rate at 0.1 bar (1.5 psi)
L × W
9.5 cm (3.75 in.) × 9.2 cm (3.6 cm)
fitting
1.5 in. Tri-Clover inlet, 1/2 in. outlet hose barb
Application
Enables integration of steamable hard piped process equipment with disposable sterile fluid paths
Preparation Note
Sterilization Method
Gamma compatible up to 50 kGy; Steam @ 135 °C for 30 min (closed) 2 times
Gamma compatible up to 50 kGy; Steam @ 135 °C for 30 min (closed) 2 times
Legal Information
LYNX is a registered trademark of Merck KGaA, Darmstadt, Germany
Still not finding the right product?
Explore all of our products under 1/2英寸Lynx ST连接器