Lead paint films for children′s products

This Standard Reference Material (SRM) is intended for use in the evaluation of lead in paint on films or similar matrices using non-destructive, instrumental methods of analysis. SRM 2569 consists of three different paint films each containing a specified amount of lead (Pb) and each supported on polyester sheet. SRM 2569 is not intended for use in test method calibration for thickness and density. A unit of SRM 2569 consists of three coupons of paint on polyester and five coupons of uncoated polyester. The coupons are approximately 73 mm long by 52 mm wide. The paint films are cured lacquer having a specified thickness in the range of 20 μm to 45 μm. For more information, please refer to the COA and SDS.

SRM 2569_cert

SRM 2569_SDS

Certified for the analytes listed below.
Lead (Pb)

Reference/Informational value is provided for the following analytes.
Polyester substrate

See certificate for values and more details at nist.gov/SRM.

NIST is a registered trademark of National Institute of Standards and Technology

SRM is a registered trademark of National Institute of Standards and Technology