material
off-white silicone body (123 mil thick), yellow PTFE face (2 mil thick)
packaging
pkg of 100 ea
diam.
12.5 mm ( 1/2 in.)
General description
PTFE-faced septa are suitable to overcome the degradation due to prolonged high temperatures which occurs in silicone rubber septa. The degradation results in baseline drift and additional peaks. It is generally fixed with the PTFE faced towards the column packing.
PTFE面隔垫专门用于需要更大惰性的应用。类白色硅胶体（123 mil厚）为黄色PTFE面（2 mil厚）提供了大量支撑。注射时PTFE破裂后，可能会发生一些流血。由于这种出血随着橡胶暴露而增加，因此我们建议使用针头引导来减小穿刺区域的大小。在200℃至300℃的入口温度下使用。
Still not finding the right product?
Explore all of our products under SS-174 PTFE 表面隔垫
法规信息
新产品
此项目有
Beatriz Cancho et al.
Journal of chromatography. A, 943(1), 1-13 (2002-02-01)
A headspace solid-phase microextraction (HS-SPME) procedure followed by gas chromatography and electron capture detection (GC-ECD) has been developed for the determination of aldehydes in drinking water samples at microg/l concentrations. A previous derivatization with o-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine hydrochloride (PFBHA) was performed due
Carmen López-Blanco et al.
Analytical and bioanalytical chemistry, 383(4), 557-561 (2005-09-01)
Water contamination due to the wide variety of pesticides used in agriculture practices is a global environmental pollution problem. Analytical methods with low quantification limits are necessary. The application of a new extraction technique, solvent drop microextraction (SDME), followed by
Ian A. Fowlis
Gas Chromatography, 62-62 (2008)
全球贸易项目编号
| 货号 | GTIN |
|---|---|
| 22657 | 04061833657645 |