Merck
CN

24241-U

Supelco

Carboxen® 1006 多孔层壁涂开管柱

L × I.D. 30 m × 0.32 mm, average thickness 15 μm

登录查看公司和协议定价

NACRES:
SB.54

物料

fused silica

质量水平

描述

PLOT = Porous Layer Open Tubular

制造商/商品名称

Carboxen®

参数

≤25-250 °C temperature (isothermal or programmed)

平均厚度

15 μm

df

15 μm

技术

gas chromatography (GC): suitable

长度 × 内径

30 m × 0.32 mm

基质活性基团

Carbon molecular sieve phase

应用

chemicals and industrial polymers
food and beverages

色谱柱类型

capillary PLOT

正在寻找类似产品? Visit 产品对比指南

一般描述

Porous-layer open-tubular (PLOT) columns are a powerful tool used in gas chromatography for analysis of fixed gases, light hydrocarbons and volatile solvents. They are mostly preferred over traditional columns.
应用 :该色谱柱是分离许多永久性气体组分(如氦气、氢气、氮气、一氧化碳、甲烷和二氧化碳)和轻烃 (C2-C3) 的理想选择。它是分解甲醛/水/甲醇(福尔马林)混合物和监测乙烯中杂质的理想选择。该色谱柱可用于高流速和快速温度程序,以确保极佳的快速分离。
USP 代码 :无
阶段
  • 碳分子筛
温度限值
  • 常温至 250°C(等温或程序升温)

应用

  • Carboxen® 1006 PLOT capillary column may be used as an extraction device in liquid chromatography-mass spectrometry (LC-MS) coupled with in-tube solid-phase microextraction, used in order to determine patulin in dried fruit samples and fruit juice.
  • Carboxen®-1006/polydimethylsiloxane(PDMS) fiber mounted in an SPME manual holder assembly coupled with GC-MS may be used for testing lipid oxidation products in milk.
  • It may also be used as an extraction device in liquid chromatography-mass spectrometry (LC-MS) coupled with in-tube solid-phase microextraction, in order to determine ochratoxins A and B in nuts and grain samples.

其他说明

We offer a variety of chromatography accessories including analytical syringes

法律信息

Carboxen is a registered trademark of Merck KGaA, Darmstadt, Germany

分析证书(COA)

输入产品批号来搜索 分析证书(COA) 。批号可以在产品标签上"批“ (Lot或Batch)字后找到。

已有该产品?

为方便起见,与您过往购买产品相关的文件已保存在文档库中。

访问文档库

难以找到您所需的产品或批次号码?

在网站页面上,产品编号会附带包装尺寸/数量一起显示(例如:T1503-25G)。请确保 在“产品编号”字段中仅输入产品编号 (示例: T1503).

示例

T1503
货号
-
25G
包装规格/数量

其它示例:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

输入内容 1.000309185)

遇到问题?欢迎随时联系我们技术服务 寻求帮助

批号可以在产品标签上"批“ (Lot或Batch)字后面找到。

Aldrich 产品

  • 如果您查询到的批号为 TO09019TO 等,请输入去除前两位字母的批号:09019TO。

  • 如果您查询到的批号含有填充代码(例如05427ES-021),请输入去除填充代码-021的批号:05427ES。

  • 如果您查询到的批号含有填充代码(例如 STBB0728K9),请输入去除填充代码K9的批号:STBB0728。

未找到您寻找的产品?

部分情况下,可能未在线提供COA。如果搜索不到COA,可在线索取。

索取COA

Porous layer open-tubular capillary columns: preparations, applications and future directions.
Journal of Chromatography A, 842 (1), 115-142 (1999)
R T Marsili
Journal of chromatographic science, 37(1), 17-23 (1999-02-13)
A sensitive, rapid procedure for testing lipid oxidation products in milk is developed using solid-phase microextraction (SPME) and gas chromatography-mass spectrometry. SPME is as sensitive as dynamic headspace (DH) analysis for measuring the pentanal and hexanal produced in milk after
H Kataoka et al.
Journal of chromatography. A, 1216(18), 3746-3750 (2009-03-25)
A simple and sensitive method for the determination of patulin in fruit juice and dried fruit samples was developed using a fully automated method consisting of in-tube solid-phase microextraction (SPME) coupled with liquid chromatography-mass spectrometry (LC-MS). Patulin was separated within
Dawn M Chapman et al.
Journal of agricultural and food chemistry, 52(17), 5431-5435 (2004-08-19)
A rapid and automated solid phase microextraction (SPME) stable isotope dilution gas chromatography/mass spectrometry (GC-MS) method for 2-methoxy-3-isobutylpyrazine (MIBP) quantification in red wine was developed. Wines with 30% (w/v) NaCl and 2-methoxy-(2)H(3)-3-isobutylpyrazine internal standard were sampled with a 2 cm
Lucia Giordano et al.
Journal of chromatography. A, 1017(1-2), 141-149 (2003-10-31)
A new method was developed for the determination of 2-furfural (2-F) and 5-methylfurfural (5-MF), two products of Maillard reaction in vinegar, with head-space solid-phase microextraction (HS-SPME) coupled to gas chromatography-mass spectrometry (GC-MS). A divinylbenzene (DVB)/carboxen (CAR)/polydimethylsiloxane (PDMS) fibre was used

我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.

联系技术服务部门