Merck
CN
所有图片(1)

文件

SU860101

Supelco

顶空样品瓶的磁性螺旋盖，18 mm螺纹，1.5mm隔垫，100个装

PTFE/silicone septum (white PTFE/tranparent blue silicone), septum thickness 1.3 mm, pkg of 100 ea

登录查看公司和协议定价
所有图片(1)
NACRES:
NB.11

物料

PTFE/silicone septum (white PTFE/tranparent blue silicone)
stainless steel screw cap (magnetic, open-top, 8 mm center hole)

特点

closure type stainless steel hole cap

硬度

35 (Durometer: shore A)

包装

pkg of 100 ea

外径 × 高度

18 mm × 11 mm

隔板厚度

1.3 mm

配件

thread for 18 mm

正在寻找类似产品? Visit 产品对比指南

相关类别

一般描述

该磁性螺纹盖设计用于 CTC 仪器。样品瓶具有许多精密螺纹，可以将隔垫压在样品瓶上进行气密密封。中央孔设计用于固相微萃取和标准顶空分析，同时提供足够的磁性面积，以便传送完全充满的样品瓶。

分析证书(COA)

输入产品批号来搜索 分析证书(COA) 。批号可以在产品标签上"批“ （Lot或Batch）字后找到。

已有该产品？

为方便起见，与您过往购买产品相关的文件已保存在文档库中。

访问文档库

难以找到您所需的产品或批次号码？

在网站页面上，产品编号会附带包装尺寸/数量一起显示（例如：T1503-25G）。请确保 在“产品编号”字段中仅输入产品编号 (示例: T1503).

示例

T1503
货号
-
25G
包装规格/数量

其它示例：

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

输入内容 1.000309185)

遇到问题？欢迎随时联系我们技术服务 寻求帮助

批号可以在产品标签上"批“ （Lot或Batch）字后面找到。

Aldrich 产品

  • 如果您查询到的批号为 TO09019TO 等，请输入去除前两位字母的批号：09019TO。

  • 如果您查询到的批号含有填充代码（例如05427ES-021），请输入去除填充代码-021的批号：05427ES。

  • 如果您查询到的批号含有填充代码（例如 STBB0728K9），请输入去除填充代码K9的批号：STBB0728。

未找到您寻找的产品？

部分情况下，可能未在线提供COA。如果搜索不到COA，可在线索取。

索取COA

Alexander J Schmidt et al.
Journal of breath research, 14(4), 047104-047104 (2020-10-07)
Exhaled breath aerosols contain valuable metabolomic content due to gas exchange with blood at the alveolar capillary interface in the lung. Passive and selective filtering of these aerosols and droplets may reduce the amount of saliva contaminants and serve as
Alexander A Aksenov et al.
Journal of chromatography. B, Analytical technologies in the biomedical and life sciences, 1061-1062, 17-25 (2017-07-12)
Breath analysis has been gaining popularity as a non-invasive technique that is amenable to a broad range of medical uses. One of the persistent problems hampering the wide application of the breath analysis method is measurement variability of metabolite abundances

商品

GC/MS/MS Analysis of Bisphenol A (BPA) in a Fruit Flavored Energy Drink on the SLB-PAHms Column After SPME Using an Overcoated SPME Fiber

Bisphenol A (BPA) plastic is controversial in food and beverage containers. This study demonstrates SPME of BPA from an energy drink using an overcoated PDMS/DVB fiber, followed by GC/MS/MS analysis using SLB-PAHms GC Column.

Determination of 2-Chloroethanol as Marker for Fumigant Ethylene Oxide in Sesame Seeds by HS-SPME-GC-MS

The work describes the development of an HS-SPME-GC-MS method to determine 2-chloroethanol as a marker of fumigant ethylene oxide in different kinds of sesame seed samples.

实验方案

Analysis of Bisphenol A in Food by Solid Phase Microextraction Using an Overcoated Fiber

Bisphenol A (BPA) is suspected to be an endocrine disruptor. Regulations on specific migration limits (SML) from food contact materials are getting tighter (EU 2018/213) requiring more sensitive determinations. An overcoated SPME fiber provides the durability necessary for direct immersion into foods such as canned soup and pumpkin, allowing for low level analysis of BPA via SPME-GC-MS/MS.

Improved Determination of Volatile Organic Compounds in Water by SPME and GC/MS: ISO Standard 17943

High performance, reliability, and reproducibility of HS-SPME in combination with GC/MS for the determination of VOCs in water was proven in an interlaboratory trial. The new ISO 17943 using HS-SPME is an improvement on existing official methods for this determination in terms of sensitivity and selectivity.

我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.

联系技术服务部门