MCGBL4S03
Hydrophilic/Hydrophobic Durapore® 0.22 µm, Millidisk® Barrier 40 Cartridge
Millidisk® Barrier 40
Synonym(s):
Millidisk® Barrier Filter 0.22 µm hydrophilic/phobic
Select a Size
About This Item
Recommended Products
material
PVDF
polysulfone
polysulfone support
silicone seal
Quality Level
description
hydrophobic/hydrophilic
sterility
non-sterile
Sterilization Compatibility
autoclavable compatible
steam-in-place compatible
product line
Millidisk® Barrier 40
feature
hydrophilic
hydrophobic
manufacturer/tradename
Millidisk®
parameter
0.35 bar max. differential pressure (5 psid) at 123 °C (Forward)
0.35 bar max. inlet pressure (5 psi) at 123 °C (Forward)
0.7 bar max. differential pressure (10 psid) at 25 °C (Reverse)
0.7 bar max. inlet pressure (10 psi) at 25 °C (Reverse)
1.7 bar max. differential pressure (25 psid) at 80 °C (Forward)
1.7 bar max. inlet pressure (25 psi) at 80 °C (Forward)
4.1 bar max. differential pressure (60 psid) at 25 °C (Forward)
4.1 bar max. inlet pressure (60 psi) at 25 °C (Forward)
7.6 L/min flow rate at 1 bar (ΔP)
technique(s)
gas filtration: suitable
1 of 1
This Item | MCGB40S01 | MCGB20S02 | MCGB10S02 |
|---|---|---|---|
| pore size 0.22 μm | pore size 0.22 μm | pore size 0.22 μm | pore size 0.22 μm |
| technique(s) gas filtration: suitable | technique(s) gas filtration: suitable | technique(s) gas filtration: suitable | technique(s) gas filtration: suitable |
| filtration area 2000 cm2 | filtration area 2000 cm2 | filtration area 1000 cm2 | filtration area 500 cm2 |
| product line Millidisk® Barrier 40 | product line Millidisk® 40 | product line Millidisk® 20 | product line Millidisk® 10 |
| sterility non-sterile | sterility non-sterile | sterility non-sterile | sterility non-sterile |
| matrix Durapore® | matrix Durapore® | matrix Durapore® | matrix Durapore® |
General description
Packaging
Preparation Note
4 SIP cycles of 60 min @ 135 °C; 4 autoclave cycles of 60 min @ 126 °C
Analysis Note
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer Wetting Instructions for Filter Units with Durapore® Membrane user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal Information
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Customers Also Viewed
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service