Merck
CN
HomeProductsPharma & Biopharma ManufacturingSterile Filtration and Bioburden ControlGas & Vent Filters

Gas & Vent Filters

Gas and Vent Filters for Bioprocessing

Gas or vent filters containing hydrophobic membrane are commonly used as air vents throughout biomanufacturing to maintain near-ambient pressure in processing tanks and closed systems. These filters act as a barrier, preventing both the entry of adventitious microorganisms and the release of product aerosols.  

Generally, the main considerations for gas filtration include filter position, sizing, sterilization processes, and integrity testing practices. There are stringent regulatory expectations for critical gas or vent filters, which include confirming the integrity of filters on sterile holding tanks and filling machines, and after steam-in-place sterilization or use. 

We offer gas and vent filters in both cartridge and single-use capsule formats for different applications. Each sterilizing-grade filter is integrity tested during manufacturing and is supported by comprehensive documentation for compliance with regulatory requirements.

Selecting the right gas or vent filter

  • Aervent® filters contain sterilizing-grade 0.2 µm hydrophobic polytetrafluoroethylene (PTFE) membrane. These filters are used in bioprocessing applications where it is critical to use a phobic filter with validated bacterial and viral retention capabilities.
  • Millipore Express® SPG (Sterile Phobic Gamma) capsule filters contain sterilizing-grade hydrophobic 0.2 μm polyethersulfone (PES) membrane and are the preferred choice for gas filtration and venting in single-use applications. These filters are gamma-compatible.
  • Hydrophobic Durapore® filters contain 0.22 µm hydrophobic sterilizing-grade polyvinylidene fluoride (PVDF) membrane and provide reliable removal of contaminants and microorganisms from gases.
  • Aerex® cartridge filters contain 0.2 μm polytetrafluoroethylene (PTFE) membrane and are designed for the removal of bacteria and viruses from moist gas streams in moderately- or non-critical applications. Aerex® filters are not validated for bacterial retention.
  • Millipak® and Millidisk® Barrier filters contain both hydrophilic and hydrophobic sterilizing-grade 0.22 µm Durapore® PVDF membrane which allows the flow of both liquid and gas. These filters simplify PUPSIT in final filtration assemblies by maintaining sterility while removing the constraints of a flush bag or a can.

Products

Sort by Relevance
Showing 1-20 of 40
Page 1 of 2
Showing 1-20 of 40
Compare
Product Number
Product Name
Product Description
Pricing
MTGR85000
Aervent®-50 Filter Unit 0.2 µm hydrophobic 1/4 in. HB/HB
pore size 0.2 μm
MCGBL4S03
Hydrophilic/Hydrophobic Durapore® 0.22 µm, Millidisk® Barrier 40 Cartridge
Millidisk® Barrier 40
CTGR01TP1
Aervent® 0.2 µm, Cartridge
pore size 0.2 μm, cartridge nominal length 10 in. (25 cm), Code 0
KHGES03TT3
Millipore Express® SHC, Opticap® XL Capsule
sterile, Opticap® XL 3, inlet connection diam. 1.5 in., pore size 0.5/0.2 μm, cartridge nominal length 3 in. (7.5 cm)
KEGBG050HH
Millipore Express® SPG 0.2 µm, Opticap® XL Capsule
non-sterile, pore size 0.2 μm
CTGR75S01
Aervent® 0.2 µm, Cartridge
pore size 0.2 μm, cartridge nominal length 5 in. (13 cm), Code 7
CTGR72TP1
Aervent® 0.2 µm, Cartridge
pore size 0.2 μm, cartridge nominal length 20 in. (51 cm), Code 7
KTGRA05TT1
Aervent® 0.2 µm, Opticap® XL Capsule
inlet connection diam. 1.5 in., Opticap® XL 5, pore size 0.2 μm, cartridge nominal length 5 in. (13 cm)
KEGBG003FF3
Millipore Express® SPG 0.2 µm, Opticap® XL Capsule
Opticap® XL 300, inlet connection diam. 3/4 in., pore size 0.2 μm
KTGRA05FF1
Aervent® 0.2 µm, Opticap® XL Capsule
inlet connection diam. 3/4 in., Opticap® XL 5, pore size 0.2 μm, cartridge nominal length 5 in. (13 cm)
MCGL20S03
Durapore® 0.22 µm, Millidisk® Cartridge
filtration area 1000 cm2, hydrophilic
KEGBG003HH3
Millipore Express® SPG 0.2 µm, Opticap® XL Capsule
Opticap® XL 300, inlet connection diam. 9/16 in., pore size 0.2 μm
MCGB10S02
Hydrophobic Durapore® 0.22 µm, Millidisk® Cartridge
filtration area 500 cm2, hydrophobic
CWSS03S03
Milligard® 0.5/0.2 µm nominal, Cartridge
pore size 0.5/0.2 μm, cartridge nominal length 30 in. (75 cm), Code 0 (2-222; O-rings)
CVVI01TPE
Durapore® CBR 0.1 µm, Cartridge
pore size 0.1 μm, cartridge nominal length 10 in. (25 cm), Code 0 (2-222; O-rings)
KVGLA02NN3
Durapore® 0.22 µm, Opticap® XL Capsule
Opticap® XL 2, inlet connection diam. 1/4 in., cartridge nominal length 2 in. (5 cm)
CTGR02TP1
Aervent® 0.2 µm, Cartridge
pore size 0.2 μm, cartridge nominal length 20 in. (51 cm), Code 0 (2-222; O-rings)
CTGR03TP1
Aervent® 0.2 µm, Cartridge
pore size 0.2 μm, cartridge nominal length 30 in. (76 cm), Code 0 (2-222; O-rings)
CLGL71TP3
Durapore® 0.22 µm, High Area, Cartridge
cartridge nominal length 10 in. (25 cm), Code 7 (2-226; O-rings w/locking-tabs)
FHLP29325
Fluoropore Membrane, PTFE, hydrophobic, 0.5 µm, 293 mm, white, plain
Page 1 of 2

Related Webinars

Slide 1 of 2
Related Product Categories
Media Filtration
Safeguard bioreactors with effective cell culture media filtration. Choose the right filter for contamination prevention.
Buffer Filtration
There are multiple options for buffer filtration in biomanufacturing. Filter selection is based on process biosafety needs, buffer throughput and economics. Filters for processing buffers in biomanufacturing provide bioburden control, sterilizing-grade or virus retention performance.
Final Sterile Filtration & Filling
Enhance final filtration and sterile fill processes with pre-sterilized, single-use systems for optimized operations.
Virus Filter Holders and Systems
Flexible, easy-to-use filter holders are a key component for integration of the Viresolve® Pro Solution, enabling scalable virus filtration that meets your manufacturing demands.
Stainless Steel Connectors, Valves & Mixers
Elevate Fluid Handling Excellence: Experience NovAseptic® components – enhancing safety, quality, and processing efficiency in sanitary operations.
Sterile Filters
Secure microbial safety with sterile filtration and disposable filters. Choose the right sterilizing filter for effective bioburden control.
Single-Use Mixers
Explore Mobius® single-use mixing solutions for pharmaceutical ingredient blending and process solution preparation.
Single-Use Assemblies
Streamline biopharma manufacturing with Mobius® 2D and 3D single-use assemblies. From transport to final fill, achieve flexible fluid management.
Related Applications
Monoclonal Antibody Manufacturing
Monoclonal antibody manufacturing is a highly templated approach used to produce mAb-based immunotherapies. Robust, scalable process solutions are required at every step to ensure high therapeutic concentration and process safety, while meeting speed-to-market and cost containment concerns.
Blood Plasma Fractionation
Consistent, reliable performance is key to blood plasma fractionation, posing challenges to improve yield, maintain process economics, and manage regulatory requirements. Learn how the right partner can help fractionators to better serve patients globally with enhanced IgG, albumin, and Factor VIII products.
Classical Pharmaceutical Formulation & Manufacturing
Manufacturing the final dosage form of a small molecule drug requires robust quality and design in development of the formulation and production of the final product. Explore solutions and best practices to advance and accelerate small molecule pharmaceuticals, from development to commercialization.
Gene Therapy Manufacturing
Growing use of gene therapies is driving rapid innovation in an evolving global market. Manufacturers bringing new gene therapies to life face complex challenges, requiring an experienced partner capable of integrating vector manufacturing, testing, safety, process development, and regulatory compliance.
Vaccine Manufacturing
From early phase development, through downstream purification to large scale vaccine production: learn more about vaccine process development and application expertise.
Cell Therapy Manufacturing
Introducing a new cell therapy demands optimal performance in upstream and downstream processing, process development, testing, and manufacturing. World-class products and partners are critical to success, speeding advancement of therapeutics that are effective, safe, and affordable.
Related Services
Systems & Equipment Installation
Systems & Equipment Installation
Training & Education
Pharmaceutical and biopharmaceutical manufacturers can enhance their skill sets with practical, hands-on training courses in-person or streamed live from our M Lab™ Collaboration Centers.
Systems Qualification
Our systems qualification services ensure your systems are compliant with all applicable regulatory requirements, and performing based on your qualifications. Learn more about how we can help ensure confidence in the implementation of your new system.
Customer Collaboration Labs for Bioprocessing Optimization
Optimize your biomanufacturing at M Lab™ Collaboration Centers, where customers explore, learn and collaborate to solve their toughest bioprocess challenges.
Device Validation
Device Validation
mAb Development and Manufacturing Services
With Millipore® CTDMO Services we provide deep expertise and flexible solutions across all stages of development and manufacturing for monoclonal antibodies, bi-specific antibodies, fusion proteins, or antibody fragments. From mammalian cell line and process development to media and feed screening, master cell banking, scale-up, and GMP clinical and commercial drug substance.
Emprove® Program
Emprove® Program: The smart way to master compliance and control. Complementing our product portfolio, the Emprove® Program provides convenient access to reliable technical, regulatory and supply information in Emprove® Dossiers to support your risk assessment continuum.
Sign In To Continue

To continue reading please sign in or create an account.

Don't Have An Account?