Product Name
Durapore® 0.22 µm, Millipak® Final Fill Capsule, Millipak® Final Fill
material
PVDF membrane
polysulfone housing
silicone O-ring
reg. compliance
meets FDA all component materialsIndirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility
sterile
product line
Millipak® Final Fill
feature
hydrophilic
manufacturer/tradename
Durapore®
parameter
0.7 bar max. differential pressure (10 psid) at 25 °C (Reverse)
1.7 bar max. differential pressure (20 psid) at 80 °C (Forward)
5.5 bar max. differential pressure (80 psid) at 25 °C (Forward)
technique(s)
sterile filtration: suitable
filter diam.
7.6 cm (3 in.)
filtration area
100 cm2
impurities
<0.25 EU/mL USP Bacterial Endotoxins (LAL test, sample aqueous extraction)
matrix
Durapore®
pore size
0.22 μm
bubble point
≥50 psi (3450 mbar), air with water at 23 °C
fitting
19 mm (3/4 in.) inlet sanitary flange
19 mm (3/4 in.) outlet sanitary flange
Looking for similar products? Visit Product Comparison Guide
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer general guidelines section of user guide shipped with this product
- Storage Statement: Please refer user guide shipped with this product
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations
Legal Information
Regulatory Information
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service