SHGEA47HH3
Millipore Express® SHC 0.5/0.2µm,, OptiScale® 47mm Capsule
Fittings 1/4 in. HB/HB, Autoclavable
Synonym(s):
Optiscale 47mm Millipore Express SHC 0.5/0.2 μm 1/4 in. HB/HB, Millipore Express® SHC, OptiScale® Capsule
Select a Size
About This Item
Product Name
OptiScale® 47 Capsule Media: Millipore Express® SHC 0.5 / 0.2 µm, Max Pressure: 80 psi @ 25 °C
material
PVDF vent cap, fluoroelastomer FKM seal, fluoroelastomer O-ring, polyethersulfone membrane, polypropylene housing, polypropylene support
Quality Level
sterility
non-sterile
sterilization compatibility
autoclavable compatible
product line
OptiScale®
impurities
<0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
matrix
Millipore Express® SHC
pore size
0.5/0.2 μm pore size
bubble point
≥4000 mbar (58 psig), air with water at 23 °C
fitting
6 mm (1/4 in.) inlet hose barb, 6 mm (1/4 in.) outlet hose barb
reg. compliance
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
feature
hydrophilic
manufacturer/tradename
Millipore Express®
parameter
5.1 bar max. differential pressure (80 psi) at 25 °C (Forward), 5.5 bar max. inlet pressure (80 psi) at 25 °C, 690 mbar max. differential pressure (10 psi) at 25 °C (Reverse)
technique(s)
sterile filtration: suitable
L
3.70 in. (94 mm)
W
2.75 in.
cartridge nominal length
3.70 in. (94 mm)
diam.
2.75 in. (70 mm)
filtration area
17.7 cm2
inlet connection diam.
1/4 in.
outlet connection diam.
1/4 in.
General description
Preparation Note
3 autoclave cycles of 60 min @ 126 °C
Analysis Note
Other Notes
- Organism Retention: Bacterial
- Mode of Action: Filtration (size exclusion)
- Application: Protein purification
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer installation and wetting sections of OPTISCALE®-25 user guide
- Storage Statement: Please refer OPTISCALE®-25 user guide
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal Information
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Articles
A cost-model compares modalities like viral vectors and mRNA for production scale decision-making.
Related Content
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service