Skip to Content
Merck
CN

Nickel alloys in the oral environment.

Expert review of medical devices (2013-07-31)
John C Wataha, Jeanie L Drury, Whasun O Chung
ABSTRACT

The use of nickel casting alloys for long-term restorations in dentistry has long been controversial. A 'tug-of-war' between economic, engineering and biological considerations is central to this controversy; nickel-casting alloys have low costs and favorable physical properties, but are corrosion-prone in the oral environment. Clinicians and researchers have questioned the safety of nickel-containing dental alloys because several nickel compounds are known to cause adverse biological effects in vivo and in vitro in contexts outside of dentistry. The debate revolves around the extent to which corrosion products from oral restorations cause intraoral or systemic biological problems. Current evidence suggests that nickel alloys may be used successfully and safely in dentistry if clinical risks are taken into account. However, these alloys may cause significant clinical problems, primarily allergenic and inflammatory, if the risks are ignored.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Nickel, foil, thickness 0.5 mm, 99.98% trace metals basis
Sigma-Aldrich
Nickel, foil, thickness 0.1 mm, 99.98% trace metals basis
Sigma-Aldrich
Nickel, wire, diam. 0.5 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Nickel, nanopowder, <100 nm avg. part. size, ≥99% trace metals basis
Sigma-Aldrich
Nickel, rod, diam. 6.35 mm, ≥99.99% trace metals basis
Nickel, wire reel, 250m, diameter 0.25mm, annealed, 99%
Nickel, foil, 8mm disks, thickness 0.5mm, as rolled, 100%
Nickel, foil, 2m coil, thickness 0.025mm, coil width 600mm, as rolled, 99%
Nickel, foil, 50x50mm, thickness 1.0mm, as rolled, 99.999%
Nickel, rod, 1000mm, diameter 3.0mm, 99%
Nickel, foil, 25x25mm, thickness 0.30mm, as rolled, 99.98%
Nickel, foil, light tested, 50x50mm, thickness 0.05mm, as rolled, 99.99+%
Nickel, foil, not light tested, 45x45mm, thickness 0.004mm, hard, 99.98%
Nickel, foil, not light tested, 90x90mm, thickness 0.004mm, hard, 99.98%
Nickel, mesh, 130x130mm, nominal aperture 0.34mm, thickness 0.025mm, wire diameter 0.041mm, 70 wires/inch, open area 80%, electro-formed mesh, 99.9%
Nickel, foil, 2m coil, thickness 0.02mm, 99.9%
Nickel, foil, not light tested, 50x50mm, thickness 0.0025mm, 99.95%
Nickel, foil, 25x25mm, thickness 0.3mm, annealed, 99%
Nickel, mesh, 30x30mm, nominal aperture 0.43mm, thickness 0.004mm, wire diameter 0.067mm, 51 wires/inch, open area 75%, electro-formed mesh, 99.9%
Nickel, foil, not light tested, 25x25mm, thickness 0.0125mm, 99.99+%
Nickel, tube, 500mm, outside diameter 1.8mm, inside diameter 1.6mm, wall thickness 0.1mm, hard, 99.5%
Nickel, foil, light tested, 50x50mm, thickness 0.007mm, 99.95%
Nickel, foil, 25x25mm, thickness 0.125mm, as rolled, 99.999%
Nickel, microfoil, disks, 25mm, thinness 0.5μm, specific density 438.8μg/cm2, permanent mylar 3.5μm support, 99.99+%
Nickel, foil, 150x300mm, thickness 0.25mm, annealed, 99.98%
Nickel, foil, not light tested, 25x25mm, thickness 0.001mm, 99.95%
Nickel, rod, 200mm, diameter 10.0mm, 99.99+%
Nickel, foil, 50mm disks, thickness 0.025mm, annealed, 99%
Nickel, foil, 5m coil, thickness 0.0125mm, 99.9%
Nickel, foil, 50mm disks, thickness 0.075mm, as rolled, 99.98%