Skip to Content
Merck
CN
  • Fate of copper complexes in hydrothermally altered deep-sea sediments from the Central Indian Ocean Basin.

Fate of copper complexes in hydrothermally altered deep-sea sediments from the Central Indian Ocean Basin.

Environmental pollution (Barking, Essex : 1987) (2014-08-12)
Parthasarathi Chakraborty, Sylvia G Sander, Saranya Jayachandran, B Nagender Nath, G Nagaraju, Kartheek Chennuri, Krushna Vudamala, N Lathika, Maria Brenda L Mascarenhas-Pereira
ABSTRACT

The current study aims to understand the speciation and fate of Cu complexes in hydrothermally altered sediments from the Central Indian Ocean Basin and assess the probable impacts of deep-sea mining on speciation of Cu complexes and assess the Cu flux from this sediment to the water column in this area. This study suggests that most of the Cu was strongly associated with different binding sites in Fe-oxide phases of the hydrothermally altered sediments with stabilities higher than that of Cu-EDTA complexes. The speciation of Cu indicates that hydrothermally influenced deep-sea sediments from Central Indian Ocean Basin may not significantly contribute to the global Cu flux. However, increasing lability of Cu-sediment complexes with increasing depth of sediment may increase bioavailability and Cu flux to the global ocean during deep-sea mining.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Copper, foil, ≥99.8% (complexometric)
Sigma-Aldrich
Copper, wire, diam. 0.25 mm, 99.999% trace metals basis
Sigma-Aldrich
Copper, wire, diam. 2.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Copper, wire, diam. 0.64 mm, 99.995% trace metals basis
Sigma-Aldrich
Copper, beads, 2-8 mm, 99.9995% trace metals basis
Sigma-Aldrich
Copper, foil, thickness 1.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Copper, wire, diam. 1.0 mm, ≥99.9%
Sigma-Aldrich
Copper, foil, thickness 0.5 mm, 99.98% trace metals basis
Sigma-Aldrich
Copper, foil, thickness 0.025 mm, 99.98% trace metals basis
Sigma-Aldrich
Copper, beads, 2-8 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Copper, turnings, purum p.a., ≥99.0%
Sigma-Aldrich
Copper, powder, <75 μm, 99%
Copper, rod, 500mm, diameter 2.0mm, as drawn, 99.99+%
Copper - O.F.H.C., foil, light tested, 150x150mm, thickness 0.05mm, hard, 99.95+%
Copper - O.F.H.C., rod, 50mm, diameter 25.4mm, as drawn, 99.99+%
Copper - O.F.H.C., wire reel, 10m, diameter 0.25mm, as drawn, 99.95+%
Copper - O.F.H.C., foil, 8mm disks, thickness 0.25mm, half hard, 99.95+%
Copper - O.F.H.C., tube, 200mm, outside diameter 1.23mm, inside diameter 0.51mm, wall thickness 0.36mm, 99.95+%
Copper - O.F.H.C., rod, 25mm, diameter 25.4mm, as drawn, 99.99+%
Copper - O.F.H.C., tube, 100mm, outside diameter 0.9mm, inside diameter 0.56mm, wall thickness 0.17mm, 99.95+%
Copper - O.F.H.C., tube, 100mm, outside diameter 3.2mm, inside diameter 2.4mm, wall thickness 0.4mm, 99.95+%
Copper - O.F.H.C., tube, 1000mm, outside diameter 0.38mm, inside diameter 0.22mm, wall thickness 0.08mm, 99.95+%
Copper - O.F.H.C., wire reel, 50m, diameter 0.5mm, as drawn, 99.95+%
Copper - O.F.H.C., rod, 200mm, diameter 9.5mm, as drawn, 99.95+%
Copper - O.F.H.C., tube, 100mm, outside diameter 1.23mm, inside diameter 0.51mm, wall thickness 0.36mm, 99.95+%
Copper - O.F.H.C., wire reel, 100m, diameter 0.25mm, as drawn, 99.95+%
Copper - O.F.H.C., wire reel, 10m, diameter 0.125mm, annealed, 99.95+%
Copper - O.F.H.C., wire reel, 10m, diameter 1.0mm, as drawn, 99.95+%
Copper - O.F.H.C., sheet, 150x150mm, thickness 4.76mm, 99.95+%
Copper - O.F.H.C., rod, 500mm, diameter 16mm, as drawn, 99.95+%