Merck
CN
  • Using the hemoglobin content of reticulocytes (RET-He) to evaluate anemia in patients with cancer.

Using the hemoglobin content of reticulocytes (RET-He) to evaluate anemia in patients with cancer.

American journal of clinical pathology (2014-09-23)
Ellinor I B Peerschke, Melissa S Pessin, Peter Maslak
ABSTRACT

Evaluation of anemia, particularly iron deficiency, in patients with cancer is difficult. This study examined using the hemoglobin content of reticulocytes (RET-He) to rule out iron deficiency, as defined by serum iron studies (transferrin saturation <20%, serum iron <40 μg/dL, and ferritin <100 ng/mL), in an unselected cancer patient population. Patients were entered into the study based on the existence of concurrent laboratory test requests for CBC and serum iron studies. Using a threshold of 32 pg/cell, RET-He ruled out iron deficiency with a negative predictive value (NPV) of 98.5% and 100%, respectively, in the study population (n = 209) and in a subpopulation of patients with low reticulocyte counts (n = 19). In comparison, the NPV of traditional CBC parameters (hemoglobin, <11 g/dL; mean corpuscular volume, <80 fL) was only 88.5%. These results support the use of RET-He in the evaluation of iron deficiency in a cancer care setting.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Ferritin from equine spleen, Type I, saline solution
Iron, IRMM®, certified reference material, 0.5 mm wire
Sigma-Aldrich
Iron, puriss. p.a., carbonyl-Iron powder, low in magnesium and manganese compounds, ≥99.5% (RT)
Sigma-Aldrich
Iron, foil, thickness 0.1 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Iron, chips, 99.98% trace metals basis
Sigma-Aldrich
Iron, powder, −325 mesh, 97%
Iron, foil, not light tested, 50x50mm, thickness 0.001mm, 99.85%
Iron, foil, 50mm disks, thickness 0.20mm, hard, 99.5%
Iron, foil, 50mm disks, thickness 0.5mm, hard, 99.5%
Iron, foil, 6mm disks, thickness 0.20mm, hard, 99.5%
Iron, foil, light tested, 50x50mm, thickness 0.0125mm, 99.99+%
Iron, foil, 8mm disks, thickness 0.004mm, 99.99+%
Iron, foil, 50mm disks, thickness 0.25mm, hard, 99.5%
Iron, foil, light tested, 50x50mm, thickness 0.015mm, 99.85%
Iron, foil, 5m coil, thickness 0.075mm, hard, 99.5%
Iron, foil, 8mm disks, thickness 0.006mm, 99.85%
Iron, foil, 6mm disks, thickness 0.038mm, hard, 99.5%
Iron, foil, 5m coil, thickness 0.5mm, coil width 49mm, armco« soft ingot 99.8+%
Iron, foil, not light tested, 100x100mm, thickness 0.0025mm, 99.85%
Iron, foil, light tested, 100x100mm, thickness 0.025mm, hard, 99.5%
Iron, foil, 8mm disks, thickness 0.020mm, 99.85%
Iron, foil, 15mm disks, thickness 0.0125mm, 99.85%
Iron, foil, 10mm disks, thickness 0.025mm, hard, 99.5%
Iron, foil, 1m coil, thickness 0.1mm, hard, 99.5%
Iron, foil, 10mm disks, thickness 0.038mm, hard, 99.5%
Iron, foil, 1m coil, thickness 0.5mm, hard, 99.5%
Iron, foil, 20m coil, thickness 0.075mm, hard, 99.5%
Iron, foil, 15mm disks, thickness 0.38mm, hard, 99.5%
Iron, foil, 10mm disks, thickness 0.125mm, as rolled, 99.99+%
Iron, foil, 10mm disks, thickness 0.25mm, as rolled, 99.99+%