Skip to Content
Merck
CN

Hepatic iron in African Americans who underwent liver biopsy.

The American journal of the medical sciences (2015-01-07)
James C Barton, Luigi F Bertoli, Thomas J Alford, J Clayborn Barton, Corwin Q Edwards
ABSTRACT

Primary iron overload in African Americans has been reported predominantly from autopsy studies. We characterized hepatic iron phenotypes in 83 African Americans who underwent liver biopsy during the interval 1990 to 1995. We tabulated pathology report form data, iron grades in hepatocytes (0-4) and Kupffer cells (0-3) and abnormal liver histology. Increased iron was defined as hepatocyte or Kupffer iron grades ≥ 2, respectively. Heavy iron was defined as hepatocyte iron grade 3 or 4. Primary iron overload was defined as the presence of grade 3 or 4 hepatocellular iron in the absence of evidence of chronic alcohol effect, viral hepatitis, steatosis, unexplained inflammation, chronic erythrocyte transfusion or chronic ingestion of iron supplements. There were 37 men and 46 women (mean age: 53 ± 15 [SD] years). We observed heavy ethanol consumption, 12.0%; viral hepatitis, 26.5%; steatosis without heavy ethanol consumption, 43.4%; inflammation, 45.6%; fibrosis, 26.2% and bridging fibrosis/cirrhosis, 29.4%. Logistic regression on bridging fibrosis/cirrhosis revealed positive associations with heavy ethanol consumption (P = 0.0410) and viral hepatitis (P = 0.0044). The 22 patients (26.5%) with increased iron had greater mean age, proportion of men and heavy ethanol consumption. Five patients had heavy iron staining, among whom were 3 women (mean age: 54 years) with primary iron overload. Two of the 3 women had cirrhosis and diabetes mellitus. Among 83 adult African Americans who underwent liver biopsy, 3.6% had hepatic iron phenotypes consistent with primary iron overload.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Iron, powder, −325 mesh, 97%
Sigma-Aldrich
Iron, foil, thickness 0.1 mm, ≥99.9% trace metals basis
Iron, IRMM®, certified reference material, 0.5 mm wire
Sigma-Aldrich
Iron, chips, 99.98% trace metals basis
Iron, microfoil, disks, 10mm, thinness 0.05μm, specific density 40.44μg/cm2, permanent mylar 3.5μm support, 99.99+%
Iron, foil, 8mm disks, thickness 0.05mm, as rolled, 99.99+%
Iron, foil, 6mm disks, thickness 0.5mm, as rolled, 99.99+%
Iron, foil, 5m coil, thickness 0.5mm, coil width 49mm, armco« soft ingot 99.8+%
Iron, foil, light tested, 25x25mm, thickness 0.025mm, hard, 99.5%
Iron, foil, 1m coil, thickness 0.1mm, hard, 99.5%
Iron, foil, 8mm disks, thickness 0.075mm, as rolled, 99.99+%
Iron, foil, 6mm disks, thickness 0.01mm, 99.85%
Iron, foil, 50mm disks, thickness 0.1mm, hard, 99.5%
Iron, foil, 150x150mm, thickness 2.0mm, as rolled, armco« soft ingot 99.8%
Iron, foil, 50x50mm, thickness 0.15mm, hard, 99.5%
Iron, foil, 6mm disks, thickness 0.075mm, hard, 99.5%
Iron, rod, 500mm, diameter 19mm, as drawn, soft ingot 99.8%
Iron, foil, 2m coil, thickness 0.038mm, hard, 99.5%
Iron, foil, 8mm disks, thickness 0.003mm, 99.85%
Iron, foil, 100x100mm, thickness 2.0mm, as rolled, 99.95%
Iron, rod, 500mm, diameter 9.5mm, as drawn, 98+%
Iron, foil, 25x25mm, thickness 2mm, as rolled, 99.99+%
Iron, rod, 200mm, diameter 50mm, as drawn, armcO« soft ingot 99.8%
Iron, foil, 25x25mm, thickness 1.83mm, Quarter hard, 99.5%
Iron, rod, 100mm, diameter 100mm, as drawn, armcO« soft ingot 99.8%
Iron, foil, 150x150mm, thickness 0.38mm, hard, 99.5%
Iron, foil, not light tested, 50x50mm, thickness 0.009mm, 99.85%
Iron, rod, 200mm, diameter 50mm, as drawn, 98+%
Iron, foil, 4mm disks, thickness 0.008mm, 99.85%
Iron, tube, 1000mm, outside diameter 12.0mm, inside diameter 10mm, wall thickness 1.0mm, annealed, 99.5%