Skip to Content
Merck
CN
  • N-Succinimidyl guanidinomethyl iodobenzoate protein radiohalogenation agents: influence of isomeric substitution on radiolabeling and target cell residualization.

N-Succinimidyl guanidinomethyl iodobenzoate protein radiohalogenation agents: influence of isomeric substitution on radiolabeling and target cell residualization.

Nuclear medicine and biology (2014-08-27)
Jaeyeon Choi, Ganesan Vaidyanathan, Eftychia Koumarianou, Darryl McDougald, Marek Pruszynski, Takuya Osada, Tony Lahoutte, H Kim Lyerly, Michael R Zalutsky
ABSTRACT

N-succinimidyl 4-guanidinomethyl-3-[(*)I]iodobenzoate ([(*)I]SGMIB) has shown promise for the radioiodination of monoclonal antibodies (mAbs) and other proteins that undergo extensive internalization after receptor binding, enhancing tumor targeting compared to direct electrophilic radioiodination. However, radiochemical yields for [(131)I]SGMIB synthesis are low, which we hypothesize is due to steric hindrance from the Boc-protected guanidinomethyl group ortho to the tin moiety. To overcome this, we developed the isomeric compound, N-succinimidyl 3-guanidinomethyl-5-[(131)I]iodobenzoate (iso-[(131)I]SGMIB) wherein this bulky group was moved from ortho to meta position. Boc2-iso-SGMIB standard and its tin precursor, N-succinimidyl 3-((1,2-bis(tert-butoxycarbonyl)guanidino)methyl)-5-(trimethylstannyl)benzoate (Boc2-iso-SGMTB), were synthesized using two disparate routes, and iso-[*I]SGMIB synthesized from the tin precursor. Two HER2-targeted vectors - trastuzumab (Tras) and a nanobody 5F7 (Nb) - were labeled using iso-[(*)I]SGMIB and [(*)I]SGMIB. Paired-label internalization assays in vitro with both proteins, and biodistribution in vivo with trastuzumab, labeled using the two isomeric prosthetic agents were performed. When the reactions were performed under identical conditions, radioiodination yields for the synthesis of Boc2-iso-[(131)I]SGMIB were significantly higher than those for Boc2-[(131)I]SGMIB (70.7±2.0% vs 56.5±5.5%). With both Nb and trastuzumab, conjugation efficiency also was higher with iso-[(131)I]SGMIB than with [(131)I]SGMIB (Nb, 33.1±7.1% vs 28.9±13.0%; Tras, 45.1±4.5% vs 34.8±10.3%); however, the differences were not statistically significant. Internalization assays performed on BT474 cells with 5F7 Nb indicated similar residualizing capacity over 6h; however, at 24h, radioactivity retained intracellularly for iso-[(131)I]SGMIB-Nb was lower than for [(125)I]SGMIB-Nb (46.4±1.3% vs 56.5±2.5%); similar results were obtained using Tras. Likewise, a paired-label biodistribution of Tras labeled using iso-[(125)I]SGMIB and [(131)I]SGMIB indicated an up to 22% tumor uptake advantage at later time points for [(131)I]SGMIB-Tras. Given the higher labeling efficiency obtained with iso-SGMIB, this residualizing agent might be of value for use with shorter half-life radiohalogens.

MATERIALS
Product Number
Brand
Product Description

Sodium hydroxide, reagent grade, ≥98%, pellets (anhydrous)
Sodium hydroxide solution, 50% in H2O
Sodium hydroxide, BioUltra, suitable for luminescence, ≥98.0% (T), pellets
Sodium hydroxide solution, 49-51% in water, eluent for IC
Sodium hydroxide, pellets, semiconductor grade, 99.99% trace metals basis
Sodium hydroxide solution, purum, ≥32%
Sodium hydroxide solution, 5.0 M
Sodium hydroxide, reagent grade, 97%, flakes
Sodium hydroxide concentrate, 0.1 M NaOH in water (0.1N), Eluent concentrate for IC
Sodium hydroxide, ACS reagent, ≥97.0%, pellets
Sodium hydroxide solution, BioUltra, Molecular Biology, 10 M in H2O
Sodium hydroxide, beads, 16-60 mesh, reagent grade, 97%
Sodium hydroxide, reagent grade, 97%, powder
Sodium hydroxide, puriss. p.a., ACS reagent, K ≤0.02%, ≥98.0% (T), pellets
Sodium hydroxide solution, 1.0 N, BioReagent, suitable for cell culture
Sodium hydroxide, puriss., meets analytical specification of Ph. Eur., BP, NF, E524, 98-100.5%, pellets
Sodium hydroxide, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
3-Ethyl-2,4-pentanedione, mixture of tautomers, 98%
Sodium hydroxide, ultra dry, powder or crystals, 99.99% trace metals basis
Sodium hydroxide, puriss. p.a., ACS reagent, reag. Ph. Eur., K ≤0.02%, ≥98%, pellets
Sodium hydroxide, anhydrous, free-flowing, Redi-Dri, reagent grade, ≥98%, pellets
Sodium hydroxide-16O solution, 20 wt. % in H216O, 99.9 atom % 16O
Sigma-Aldrich
Sodium, 25-35 wt % dispersion in paraffin