Skip to Content
Merck
CN
  • Method development for simultaneous analyses of multiple legacy and emerging organic chemicals in sediments.

Method development for simultaneous analyses of multiple legacy and emerging organic chemicals in sediments.

Journal of chromatography. A (2014-12-03)
Jiehong Guo, Zhuona Li, Andy L Sandy, An Li
ABSTRACT

The objective of this work was to investigate the feasibility of using a single pretreatment procedure for the analyses of multiple groups of organics, which have a wide range of chemical structures and physicochemical properties, in sediment samples. Nine groups of 162 individual compounds (including 11 surrogates) were investigated, including polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), polychlorinated diphenyl ethers (PCDEs), polychlorinated naphthalenes (PCNs), organochlorine pesticides (OCPs), polybrominated diphenyl ethers (PBDEs), novel halogenated flame retardants (nXFRs), musk fragrances (MFs) and organophosphate flame retardants (OPFRs). The individual and grouped recoveries of spiked analytes from adsorption chromatographic columns using either only fully activated, neutral silica gel (SG) or the combinations of silica gel and alumina (Si/Al) sorbents were compared. The results showed a generally stronger adsorption and more effective fractionation on the Si/Al column than on the SG column. The dependence of fractionation on halogen substitution, molecular planarity, and polar functional groups was discussed. The effects of adding sulfuric acid with two different methods were investigated, and the recoveries of a number of MFs, OCPs, nXFRs and OPFRs were recovered less than 60%. Sodium hydroxide treatment of silica gel had minor effects on some OPFRs. Copper used to remove elemental sulfur did not affect the recoveries of all target analytes except chloroneb. The finalized method was validated by spiking the target analysts into the sediment samples and comparing the analytical results of this work on two standard reference materials for sediment (SRMs 1941b and 1944) with the certified or reference values.

MATERIALS
Product Number
Brand
Product Description

Supelco
Sodium hydroxide concentrate, 0.1 M NaOH in water (0.1N), Eluent concentrate for IC
Sigma-Aldrich
Sodium sulfate, ≥99.99% trace metals basis
Supelco
Hydrogen chloride – ethanol, ~1.25 M HCl, derivatization grade (GC derivatization), LiChropur
Supelco
Hydrogen chloride – 2-propanol solution, ~1.25 M HCl (T), derivatization grade (GC derivatization), LiChropur
Supelco
Aluminum oxide, activated, neutral, Brockmann Activity I
Sigma-Aldrich
Sodium sulfate, tested according to Ph. Eur., anhydrous
Sigma-Aldrich
Hydrochloric acid solution, for amino acid analysis, ~6 M in H2O
Sigma-Aldrich
Sodium hydroxide solution, BioUltra, Molecular Biology, 10 M in H2O
Sigma-Aldrich
Aluminum oxide, mesoporous, MSU-X (wormhole), average pore size 3.8 nm
Supelco
Hydrogen chloride – methanol solution, ~1.25 m HCl (T), derivatization grade (GC derivatization), LiChropur
Sigma-Aldrich
Sodium sulfate, BioUltra, anhydrous, ≥99.0% (T)
Sigma-Aldrich
3-Ethyl-2,4-pentanedione, mixture of tautomers, 98%
Sigma-Aldrich
Hydrochloric acid, 36.5-38.0%, BioReagent, Molecular Biology
Supelco
Hydrochloric acid solution, volumetric, 0.1 M HCl (0.1N), endotoxin free
Sigma-Aldrich
Hydrochloric acid solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Sodium sulfate, BioXtra, ≥99.0%
Sigma-Aldrich
Sodium sulfate, ≥99.0%, suitable for plant cell culture
Sigma-Aldrich
Sodium hydroxide, BioUltra, suitable for luminescence, ≥98.0% (T), pellets
Supelco
Sodium hydroxide solution, 49-51% in water, eluent for IC
Sigma-Aldrich
Hydrochloric acid, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., fuming, ≥37%, APHA: ≤10
Sigma-Aldrich
Sodium hydroxide, puriss. p.a., ACS reagent, K ≤0.02%, ≥98.0% (T), pellets
Sigma-Aldrich
Sodium hydroxide solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Sodium hydroxide, anhydrous, free-flowing, Redi-Dri, reagent grade, ≥98%, pellets
Sigma-Aldrich
Sodium hydroxide, puriss., meets analytical specification of Ph. Eur., BP, NF, E524, 98-100.5%, pellets
Sigma-Aldrich
Sodium hydroxide, reagent grade, 97%, powder
Sigma-Aldrich
Sodium hydroxide, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
Sodium hydroxide solution, 5.0 M
Sigma-Aldrich
Sodium sulfate, anhydrous, free-flowing, Redi-Dri, ACS reagent, ≥99%
Sigma-Aldrich
Sodium sulfate, ReagentPlus®, ≥99.0%
Sigma-Aldrich
Sodium hydroxide, BioXtra, ≥98% (acidimetric), pellets (anhydrous)