Chemometric and environmental assessment of arsenic, antimony, and chromium speciation form occurrence in a water reservoir subjected to thermal anthropopressure.

In the study, arsenic, antimony, and chromium concentrations and selected physicochemical parameters in water and sediment samples from the thermal anthroporessure subjected Rybnik Reservoir (Poland) were determined. As(III), As(V), Sb(III), and Sb(V) ions were successfully separated on Dionex IonPac AS7 column, and Cr(III) and Cr(VI) on Dionex IonPac AG7 column. The obtained limits of detection were 0.18, 0.22, 0.009, 0.012, 0.11, and 0.17 μg/L, respectively. Water and bottom sediment samples were collected monthly at three-point transect between January and November 2013. The As(III) and Sb(III) speciation forms dominated in the bottom water, and Cr(VI) concentration in the bottom water was twice as high as the value measured for the surface water. The oxidized arsenic, antimony, and chromium forms dominated in the bottom sediments in the heated water discharge zone of the Rybnik Power Plant. The location of sampling point had a significant influence on the observed transformations and contents of the analyzed speciation forms. The chemometric analysis coupled with the dissimilarity analysis and principal component analysis helped to visualize the variability in the concentrations of the element speciation forms within the researched period and analyzing correlations.