Skip to Content
Merck
CN
  • Formation and speciation of disinfection byproducts during chlor(am)ination of aquarium seawater.

Formation and speciation of disinfection byproducts during chlor(am)ination of aquarium seawater.

Journal of environmental sciences (China) (2015-07-05)
Haiting Zhang, Huiyu Dong, Craig Adams, Zhimin Qiang, Gang Luan, Lei Wang
ABSTRACT

The chemistry associated with the disinfection of aquarium seawater is more complicated than that of freshwater, therefore limited information is available on the formation and speciation of disinfection byproducts (DBPs) in marine aquaria. In this study, the effects of organic precursors, bromide (Br-) and pre-ozonation on the formation and speciation of several typical classes of DBPs, including trihalomethanes (THM4), haloacetic acids (HAAs), iodinated trihalomethanes (I-THMs), and haloacetamides (HAcAms), were investigated during the chlorination/chloramination of aquarium seawater. Results indicate that with an increase in dissolved organic carbon concentration from 4.5 to 9.4 mg/L, the concentrations of THM4 and HAAs increased by 3.2-7.8 times under chlorination and by 1.1-2.3 times under chloramination. An increase in Br- concentration from 3 to 68 mg/L generally enhanced the formation of THM4, I-THMs and HAcAms and increased the bromine substitution factors of all studied DBPs as well, whereas it impacted insignificantly on the yield of HAAs. Pre-ozonation with 1 mg/L O3 dose substantially reduced the formation of all studied DBPs in the subsequent chlorination and I-THMs in the subsequent chloramination. Because chloramination produces much lower amounts of DBPs than chlorination, it tends to be more suitable for disinfection of aquarium seawater.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Chloroform, anhydrous, ≥99%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Chloroform, anhydrous, contains amylenes as stabilizer, ≥99%
Sigma-Aldrich
Chloroform, ≥99%, PCR Reagent, contains amylenes as stabilizer
Sigma-Aldrich
N,N-Diethyl-p-phenylenediamine, 97%
Sigma-Aldrich
Trichloroacetic acid, BioUltra, ≥99.5% (T)
Sigma-Aldrich
Tribromoacetic acid, 99%
Sigma-Aldrich
Trichloroacetic acid, ACS reagent, for the determination of Fe in blood according to Heilmeyer, ≥99.5%
Sigma-Aldrich
tert-Butyl methyl ether, anhydrous, 99.8%
Sigma-Aldrich
Trichloroacetic acid, ACS reagent, ≥99.0%
Sigma-Aldrich
Trichloroacetic acid, BioXtra, ≥99.0%
Sigma-Aldrich
Trichloroacetic acid, suitable for electrophoresis, suitable for fixing solution (for IEF and PAGE gels), ≥99%
Sigma-Aldrich
Trichloroacetic acid, ≥99.0% (titration)
Sigma-Aldrich
Dibromochloromethane, 97%
Sigma-Aldrich
Dichloroacetic acid, ReagentPlus®, ≥99%
Sigma-Aldrich
2-Methyl-2-propanethiol, 99%
Sigma-Aldrich
Bromoform, contains 60-120 ppm 2-methyl-2-butene as stabilizer, 99%
Sigma-Aldrich
Bromoform, contains 1-3% ethanol as stabilizer, 96%
Sigma-Aldrich
21-Hydroxyprogesterone, ≥97% (HPLC)
Sigma-Aldrich
Dibromoacetic acid, 97%
Sigma-Aldrich
Hexane, anhydrous, 95%
Sigma-Aldrich
Trichloroacetic acid solution, 6.1 N
Sigma-Aldrich
tert-Butyl acetoacetate, reagent grade, 95%