Skip to Content
Merck
CN
  • Preliminary study on brominated dioxins/furans and hydroxylated/methoxylated PBDEs in Baltic cod (Gadus morhua) liver. Comparison to the levels of analogue chlorinated co-occurring pollutants.

Preliminary study on brominated dioxins/furans and hydroxylated/methoxylated PBDEs in Baltic cod (Gadus morhua) liver. Comparison to the levels of analogue chlorinated co-occurring pollutants.

Marine pollution bulletin (2015-05-24)
Marek Roszko, Krystyna Szymczyk, Małgorzata Rzepkowska, Renata Jędrzejczak
ABSTRACT

Low pg levels of PBDD/Fs in 0.8-38.9 pg g(-1) (fat) range (mean 14.2 pg g(-1)) observed in the tested cod liver samples were significantly lower than levels of their chlorinated analogues (25.1-95.9 range, 37.7 mean pg g(-1) fat). Brominated furans dominated the congener profile. Elevated levels of OH-/MeO-BDE were however observed with mean concentrations at 2769±1319 and 5441±2918 pg g(-1) (fat) respectively. The observed congener profiles with the predominance of 6-OH-BDE 47 and the relatively high proportion between the native and hydroxylated compounds indicate on natural origin of those compounds or at least presence of various exposure sources. A large fraction of studied samples did not comply with the currently standing EU regulations concerning PCBs and chlorinated dioxins (11%), especially as regards non-dioxin like PCBs (88%).

MATERIALS
Product Number
Brand
Product Description

Supelco
Hydrochloric acid solution, volumetric, 0.1 M HCl (0.1N), endotoxin free
Sigma-Aldrich
Sodium sulfate, BioXtra, ≥99.0%
Sigma-Aldrich
Carbon, mesoporous
Sigma-Aldrich
Carbon, mesoporous, nanopowder, less than 500 ppm Al, Ti, Fe, Ni, Cu, and Zn combined
Sigma-Aldrich
Aluminum oxide, mesoporous, MSU-X (wormhole), average pore size 3.8 nm
Sigma-Aldrich
Carbon, mesoporous, nanopowder, graphitized, less than 250 ppm Al, Ti, Fe, Ni, Cu, and Zn combined
Sigma-Aldrich
Cyclohexane, anhydrous, 99.5%
Sigma-Aldrich
Chloroform, anhydrous, ≥99%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Chloroform, anhydrous, contains amylenes as stabilizer, ≥99%
Sigma-Aldrich
Carbon, mesoporous, less than 100 ppm Al, Ti, Fe, Ni, Cu, and Zn combined
Sigma-Aldrich
Chloroform, ≥99%, PCR Reagent, contains amylenes as stabilizer
Sigma-Aldrich
Sulfuric acid, 99.999%
Sigma-Aldrich
Sodium sulfate, BioUltra, anhydrous, ≥99.0% (T)
Sigma-Aldrich
Sodium sulfate, ≥99.99% trace metals basis
Sigma-Aldrich
Ammonium formate, ≥99.995% trace metals basis
Sigma-Aldrich
Hydrochloric acid solution, for amino acid analysis, ~6 M in H2O
Sigma-Aldrich
Hydrochloric acid solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Hydrochloric acid, 36.5-38.0%, BioReagent, Molecular Biology
Sigma-Aldrich
Methanol, anhydrous, 99.8%
Sigma-Aldrich
Hydrochloric acid solution, 32 wt. % in H2O, FCC
Sigma-Aldrich
Methanol, suitable for NMR (reference standard)
Sigma-Aldrich
Methanol, purification grade, 99.8%
Sigma-Aldrich
Sodium sulfate, ≥99.0%, suitable for plant cell culture
Sigma-Aldrich
Aluminum oxide, nanoparticles, <50 nm particle size (DLS), 20 wt. % in isopropanol
Sigma-Aldrich
Methane-12C, 13C-depleted, 99.99 atom % 12C
Sigma-Aldrich
Methanol solution, contains 0.50 % (v/v) triethylamine
Carbon - Vitreous, rod, 200mm, diameter 1.0mm, glassy carbon
Carbon - Vitreous, foil, 100x100mm, thickness 1.0mm, glassy carbon
Sigma-Aldrich
Dichloromethane, anhydrous, ≥99.8%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Dichloromethane, suitable for HPLC, ≥99.9%, contains 40-150 ppm amylene as stabilizer