Skip to Content
Merck
CN
  • Spatial and seasonal patterns of benzene, toluene, ethylbenzene, and xylenes in the Gdansk, Poland and surrounding areas determined using radiello passive samplers.

Spatial and seasonal patterns of benzene, toluene, ethylbenzene, and xylenes in the Gdansk, Poland and surrounding areas determined using radiello passive samplers.

Journal of environmental quality (2010-04-20)
Bozena Zabiegała, Magdalena Urbanowicz, Jacek Namieśnik, Tadeusz Górecki
ABSTRACT

Atmospheric concentrations of benzene, toluene, ethylbenzene, and xylenes (BTEX) were assessed in the Gdańsk-Sopot-Gdynia Tricity area and in the city of Tczew using diffusive-type Radiello passive samplers. Samples were collected at the monitoring stations belonging to the Agency of Regional Air Quality Monitoring Foundation. The results indicated that the BTEX concentrations measured in the urban air in the Tricity area and in Tczew were dependent on the season, being somewhat higher in winter and spring than in summer. Maps of BTEX pollution in the Tricity and in Tczew were prepared by interpolating the results for the areas between the sampling points covering the mapped areas. This allowed the assessment of time-weighted average concentrations of the compounds studied at locations where measurements were not made.

MATERIALS
Product Number
Brand
Product Description

Supelco
radiello Aldehyde Calibration Standard, 50 μg/mL each component in acetonitrile, pkg of 10 mL
Supelco
radiello BTEX Calibration Kit (CS2 Desorption)
radiello Diffusive Bodies, white, configured for general use, pk of 20
radiello On-Field Thermometer, Includes one standard Radiello vertical adapter (RAD122) for each thermometer, configured for standard use, pk of 3
radiello BTEX/VOC Starter Kit, Thermal Desorption
radiello Diffusive Bodies, blue, configured for sampling light sensitive compounds, pk of 20
Supelco
radiello Methylene Blue Calibration Standard for H2S (Hydrogen Sulfide), pkg of 100 mL
radiello On-Field Thermometer, Reader, pk of 1
radiello Empty Storage Tubes, glass (with stopper), volume 2.8 mL, pk of 100
radiello Empty Storage Tubes, polypropylene (with stopper), volume 12 mL, pk of 100
radiello Diffusive Bodies, permeative, configured for anaesthetic gases and vapors, pk of 20
radiello Filtration Kit, pk of 20
Supelco
radiello BTEX Calibration Kit (Thermal Desorption)
radiello Clips, suspending Radiello triangular support plate, pk of 20
radiello BTEX/VOC Starter Kit, CS2 Desorption
radiello Diffusive Bodies, yellow, configured for reduced sampling rates, pk of 20
radiello 1,3-Butadiene Starter Kit, Thermal Desorption, pkg of 1 kit (2 RAD141 adsorbing cartridges and barcode labels, 1 RAD1202 yellow diffusive body, 1 RAD121 triangular support plate, 1 instruction sheet)
radiello Hydrogen Sulfide Starter Kit
radiello Barcode Labels, pk of 198
radiello Anesthetic Gases and Vapor Sampler
radiello Cartridge Adsorbents, for sampling Ammonia (NH3), matrix microporous PE impregnated with phosphoric acid, pk of 20
radiello Outdoor Shelter, pk of 10
radiello Cartridge Adsorbents, for sampling BTEX and VOCs (CS2 Desorption), matrix SS net (100 mesh, 5.8 mm diam.), activated with activated charcoal (30-50 mesh), pk of 20
radiello Replacement Mounting Strips, for use with Radiello Outdoor Shelter, pk of 100
radiello Cartridge Adsorbents, for sampling Anaesthetic Gases/Vapors, matrix SS net with mix of mol sieve and activated charcoal (30-50 mesh), pk of 20
radiello Cartridge Adsorbents, for sampling BTEX and VOCs (thermal desorption), matrix SS net (3 x 8 μm, 4.8 mm diam.), Carbograph, pk of 20
radiello Triangular Support Plate, pk of 20
radiello Vertical Adapter, threaded for standard use, pk of 20
radiello Cartridge Adsorbents, for sampling Aldehydes, matrix SS net with 2,4-DNPH coated FLORISIL®, pk of 20