material
PBT-based blend (gamma-stable), polyethersulfone membrane
sterility
irradiated, non-sterile
sterilization compatibility
gamma compatible
feature
hydrophobic
manufacturer/tradename
Opticap®
parameter
2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse; intermittent), 4.1 bar max. inlet pressure (60 psi) at 23 °C, 4.2 bar max. differential pressure (60 psid) at 25 °C (Forward)
technique(s)
gas filtration: suitable
L
7.2 cm (2.84 in.)
W
2.4 in.
diam.
6.2 cm (2.4 in.)
filtration area
19.6 cm2
impurities
≤0.25 EU/mL (LAL test, Aqueous extraction)
gravimetric extractables
≤1.0 mg
matrix
Millipore Express® SPG
pore size
0.2 μm pore size
bubble point
≥1170 mbar (17 psig), air with 100% IPA at 23 °C
fitting
inlet stepped hose barb for 6.5-9.5 mm I.D. silicone flexible tubing, outlet hose barb, outlet stepped hose barb for 6.5-9.5 mm I.D. silicone flexible tubing, female Luer slip interior, (14 mm (9/16 in.) Hose Barb Inlet and Outlet)
Quality Level
storage temp.
10-30°C
正在寻找类似产品? 访问 产品对比指南
Preparation Note
Gamma compatible to 45 kGy; OR 3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable
Analysis Note
Quantitative retention of 107 CFU/cm2Brevundimonas diminuta (ATCC® 19146) per ASTM methodology
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer Wetting Instructions for Filter Units with Durapore® Membrane user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal Information
我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系客户支持