Quality Segment
material
polyester support, polyethersulfone membrane, polypropylene housing
product line
Opticap®
parameter
1.4 bar max. pressure (20 psi) at 4-25 °C (reverse), 1.7 bar max. pressure (25 psi) at 80 °C, 4.5 bar max. pressure (65 psi) at 4-25 °C (forward)
technique(s)
prefiltration: suitable
L
34.2 cm (13.5 in.)
diam.
9.1 cm (3.6 in.)
filtration area
0.57 m2 (6.1 ft2)
impurities
<0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
matrix
Milligard® PES
pore size
1.2/0.8 μm pore size
fitting
inlet/outlet hose barb for 14 mm (9/16 in.)
Application
Gamma irradiation up to 40 kGy and 3 wet autoclave cycles of 60 minutes at 123°C.
Features and Benefits
≥2700 mbar (39.2 psi) air with water.
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182 based on information provided by raw material suppliers.
Devices tested and meet requirements of USP 788 for large volume parenterals.
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182 based on information provided by raw material suppliers.
Devices tested and meet requirements of USP 788 for large volume parenterals.
Packaging
1/pack
Double easy open bag.
Double easy open bag.
Legal Information
MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany
Disclaimer
EMD Millipore Corporation certifies that this product complies with the European Pressure Equipment Directive, 2014/68/EU of 15 May 2014.
This product has been classified under Article 4 § 3 of the Directive 2014/68/EU. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use.
In compliance with Article 4 § 3 of the Directive 2014/68/EU, this product does not bear the CE mark.
This product has been classified under Article 4 § 3 of the Directive 2014/68/EU. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use.
In compliance with Article 4 § 3 of the Directive 2014/68/EU, this product does not bear the CE mark.
使用 Emprove® 计划保持符合 GMP 要求
使用Emprove® Dossiers可加快资格认证、保持合规性并节省时间。
下载 Dossiers
注意：您将进入 EmproveSuite.com。您的用户名和密码与 SigmaAldrich.com 是分开的，可能不同。
免费注册，几分钟内即可访问 Emprove® Dossiers。 升级您的订阅计划，解锁 Emprove® Suite 中的高级定制内容。
没有找到您要找的内容？访问 Emprove® 计划帮助页面。