主要文件

查看所有文档

KTGRA04NN3

Aervent^® 0.2 µm, Opticap^® XL Capsule

Name: Aervent<SUP>&#174;</SUP> 0.2 µm, Opticap<SUP>&#174;</SUP> XL Capsule
Brand: MM

inlet connection diam. 1/4 in., Opticap^® XL 4, pore size 0.2 μm, cartridge nominal length 4 in. (10 cm)

别名:

Opticap XL 4 with Aervent - 4" 0.2um NPT/NPT 3pk, Aervent^® 0.2 µm, Opticap^® XL Capsule

登录查看组织和合同定价。

选择尺寸

变更视图

关于此项目

eCl@ss:

32031690

UNSPSC Code:

23151806

技术服务

需要帮助？我们经验丰富的科学家团队随时乐意为您服务。

让我们为您提供帮助

属性

产品名称

Aervent^® 0.2 µm，Opticap^® XL囊式, Chemistry: Hydrophobic Polytetrafluoroethylene (PTFE)Inlet: 1/4 in. NPTOutlet: 1/4 in. NPTMax Operating Pressure: 80 psi @ 25 °C

Quality Level

400

material

PTFE , polypropylene , polypropylene housing, polypropylene vent cap, silicone seal

sterility

non-sterile

sterilization compatibility

autoclavable compatible

product line

Opticap^® XL 4

feature

hydrophobic

manufacturer/tradename

Opticap^®

parameter

1.0 bar max. differential pressure (15 psid) at 80 °C (Forward), 1.0 bar max. inlet pressure (15 psi) at 80 °C, 2.75 bar max. inlet pressure (40 psi) at 60 °C, 25 °C max. inlet temp., 4.1 bar max. differential pressure (60 psid) at 25 °C (Reverse; intermittent), 5.5 bar max. differential pressure (80 psid) at 25 °C (Forward), 5.5 bar max. inlet pressure (80 psi) at 25 °C, 80 psig max. inlet pressure

technique(s)

gas filtration: suitable

L

7.7 in.

W

3.3 in.

cartridge nominal length

4 in. (10 cm)

diam.

8.4 cm (3.3 in.)

filtration area

0.21 m²

inlet connection diam.

1/4 in.

outlet connection diam.

1/4 in.

impurities

<0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)

gravimetric extractables

≤15 mg

matrix

Aervent^®

pore size

0.2 μm pore size

fitting

1/4 in. drain/vent hose barb (with double O-ring Seal), (6 mm (1/4 in.) NPT Inlet and Outlet)

说明

General description

Device Configuration: 取样皿滤膜

Packaging

Double Easy-Open bag

Preparation Note

Sterilization Method
30 autoclave cycles of 30 min @ 135 °C; not in-line steam sterilizable

This product was manufactured with a PTFE membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Analysis Note

Bacterial Retention
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM^® F838 methodology.

Gravimetric Extractables: after 24 hours in a 70/30% IPA/water mixture at controlled room temperature

Other Notes

Directions for Use

Organism Retention: Microorganism
Mode of Action: Filtration (size exclusion)
Application: BioProcessing
Intended Use: Reduction or removal of microorganism/bioburden
Instructions for Use: Please refer Steam Sterilization & Integrity Testing Procedures guide and first page of Visual Inspection Guide
Storage Statement: Store in dry location
Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Legal Information

AERVENT is a registered trademark of Merck KGaA, Darmstadt, Germany

ASTM is a registered trademark of American Society for Testing and Materials

OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany

Disclaimer

EMD Millipore Corporation certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.

Still not finding the right product?

Explore all of our products under Aervent^® 0.2 µm，Opticap^® XL囊式

法规信息

新产品

此项目有

分析证书(COA)

输入产品批号来搜索分析证书(COA) 。批号可以在产品标签上"批“ （Lot或Batch）字后找到。

已有该产品？

在文件库中查找您最近购买产品的文档。

访问文档库

全球贸易项目编号

货号	GTIN
KTGRA04NN3	04053252458620