产品名称
Durapore® 0.22 µm, Millipak® Final Fill灌装囊式过滤器, Inlet: 1/4 in. Hose Barb Outlet: 1/4 in. Hose Barb Vent: 1/8 in. Hose Barb
material
PVDF (Polyvinylidene Fluoride), device (Millipak® Final Fill 20), polysulfone device
sterility
sterile (sterile)
product line
Millipak® Final Fill 20
feature
hydrophilic
parameter
60 psi max. pressure (4.1 bar) at 25 °C
filtration area
100 cm2
inlet and outlet diam.
1/4 in.
inlet connection diam.
1/4 in.
outlet connection diam.
1/4 in. , Horse Barb
matrix
Durapore®
pore size
0.22 μm
bubble point
≥50 psi (3450 mbar), air with water
fitting
6 mm inlet/outlet connection (Stepped Hose Barb)
application(s)
filtration
Application
126 °C×90 分钟高压锅蒸汽灭菌3次后，装置仍保持完整性和截留率。
Packaging
3个/箱
Other Notes
本产品采用符合21 CFR 210.3(b)（6）中规定的“无纤维释放”过滤器标准的Durapore®膜制造。
Directions for Use
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer general guidelines section of user guide shipped with this product
- Storage Statement: Please refer user guide shipped with this product
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations
Legal Information
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany
Still not finding the right product?
Explore all of our products under Durapore® 0.22 µm, Millipak® Final Fill灌装囊式过滤器
使用 Emprove® 计划保持符合 GMP 要求
使用Emprove® Dossiers可加快资格认证、保持合规性并节省时间。
下载 Dossiers
注意：您将进入 EmproveSuite.com。您的用户名和密码与 SigmaAldrich.com 是分开的，可能不同。
免费注册，几分钟内即可访问 Emprove® Dossiers。 升级您的订阅计划，解锁 Emprove® Suite 中的高级定制内容。
没有找到您要找的内容？访问 Emprove® 计划帮助页面。