产品名称
Durapore® 0.22 µm, Millipak® Final Fill灌装囊式过滤器, Inlet: 1/2 in. Hose Barb Outlet: 1/2 in. Hose Barb Vent: 1/8 in. Hose Barb
Quality Level
material
PVDF membrane, polysulfone housing, silicone O-ring
reg. compliance
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility
sterile; aseptically filled
product line
Millipak® Final Fill
feature
hydrophilic
manufacturer/tradename
Durapore®
parameter
0.7 bar max. differential pressure (10 psid) at 25 °C (Reverse), 1.7 bar max. differential pressure (25 psid) at 80 °C (Forward), 5.5 bar max. differential pressure (80 psid) at 25 °C (Forward)
technique(s)
sterile filtration: suitable
filter diam.
8.1 cm (3.2 in.)
filtration area
500 cm2
impurities
<0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
matrix
Durapore®
pore size
0.22 μm pore size
bubble point
≥50 psi (3450 mbar), air with water at 23 °C
fitting
inlet hose barb (13 mm (1/2 in. )), outlet hose barb (13 mm (1/2 in.))
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer general guidelines section of user guide shipped with this product
- Storage Statement: Please refer user guide shipped with this product
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations
Legal Information
Still not finding the right product?
Explore all of our products under Durapore® 0.22 µm, Millipak® Final Fill灌装囊式过滤器
法规信息
此项目有
全球贸易项目编号
| 货号 | GTIN |
|---|---|
| MFGL10SB3 | 04054839378546 |