产品名称
Millipak®囊式过滤器,带Durapore® 0.22 µm滤膜, Chemistry: Hydrophilic Polyvinylidene Fluoride (PVDF) Inlet: 1/4 in. Hose Barb Outlet: 1/4 in. Hose Barb with Bell
Quality Level
material
PVDF membrane, PVDF vent cap, polycarbonate , polycarbonate support
sterility
irradiated, sterile
product line
Millipak®
feature
hydrophilic
manufacturer/tradename
Millipak®
parameter
0.35 bar max. differential pressure (5 psid) at 123 °C (Forward), 0.7 bar max. differential pressure (10 psid) at 25 °C (Reverse), 1.5 L/min flow rate at 1.75 bar (ΔP), 1.7 bar max. differential pressure (25 psid) at 80 °C (Forward), 10 L process volume, 25 °C max. temp., 4.1 bar max. differential pressure (60 psid) at 25 °C (Forward), 5.2 bar max. inlet pressure (75 psi) at 25 °C
technique(s)
sterile filtration: suitable
filtration area
100 cm2
inlet connection diam.
1/4 in.
outlet connection diam.
1/4 in.
impurities
≤0.5 EU/mL (LAL test, Aqueous extraction), <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
gravimetric extractables
≤1 mg/device
matrix
Durapore®
pore size
0.22 μm
bubble point
≥3450 mbar (50 psig), air with water at 23 °C
fitting
inlet hose barb, outlet hose barb (with bell), (6 mm (1/4 in.) Hose Barb Inlet and Outlet with filling bell)
shipped in
ambient
General description
Analysis Note
Other Notes
- 生物截留:微生物
- 作用机制:过滤(体积排阻)
- 应用:生物处理
- 预期用途:减少或去除微生物/生物负荷
- 使用说明:参见《Durapore® 滤膜过滤器润湿说明》用户手册
- 存储声明:干燥储存
- 处置声明:根据国家、省市和当地适用法规处置。
Legal Information
Still not finding the right product?
Explore all of our products under Millipak®囊式过滤器,带Durapore® 0.22 µm滤膜
商品
Key aspects of single-use assembly qualification including quality by design (QbD), quality risk management (QRM) and operator handling and training.
Before adoption of single-use technologies in biomanufacturing, manufacturers must assess the risk to the drug product from potential leachables. This article highlights a general approach based on the United States Pharmacopeia (USP).
全球贸易项目编号
| 货号 | GTIN |
|---|---|
| MPGL02GH2 | 04053252571268 |