material
molded polyetherimide ((21 CFR part 177.1595)), platinum cured silicone seal ((21 CFR part 177.2600))
sterility
sterile; γ-irradiated (⩾25kGy)
product line
Lynx®
parameter
1.4 bar max. pressure (20 psi) ((during actuation)), 120 L/min flow rate at 0.51 bar (8 psi), 2.4 bar max. pressure (35 psi) ((operating pressure)), 20 L/min flow rate at 0.02 bar (0.3 psi), 200 L/min flow rate at 1.4 bar (20 psi), 4-10 °C operating temperature (39-104 °F) (SIP : 2X at 135°C/275°F for 30 min. Closed)
size
59.7 -132.3 mm (2.4 -5.2 in.) × 59.7-144.5 mm (2.4-5.7 in.)
fitting
1.5 in. Tri-Clover inlet, 1.5 in. Tri-Clover outlet
application(s)
pharma/biopharma processes
General description
The Lynx® ST (Steam-To) connector is a reliable and validated sterile connector enabling a sterile transfer of process fluids. One of many Mobius®single-use bioprocessing solutions, it is designed to connect steamable hard piped processing systems to sterilized disposable flow paths. The Lynx®ST connector is available in a wide range of sizes and configurations, from sampling to intermediate additions, to bulk liquid transfer into and out of the stainless steel tanks or vessels.
Application
Sterile transfer of process fluids
Packaging
1 unit / pack
Preparation Note
"Steam @ 135 °C for 30 min (closed) 2 timesAutoclave: 45min at 130°C"
Legal Information
LYNX is a registered trademark of Merck KGaA, Darmstadt, Germany
MOBIUS is a registered trademark of Merck KGaA, Darmstadt, Germany
Still not finding the right product?
Explore all of our products under Lynx® ST