Quality Segment
product line
TraceCERT®
grade
certified reference material, TraceCERT®
concentration
10 g/L Al in nitric acid (nominal concentration)
technique(s)
ICP: suitable
application(s)
industrial qc
pharmaceutical
format
single component solution
General description
This certified reference material (CRM) is produced in accordance with ISO 17034 and characterized in accordance with ISO/IEC 17025. This CRM is traceable to SI unit kg and measured against primary material from a National Metrology Institute (NMI), e.g. NIST.
Please visit ISO certificates and Site Quality Self-Assessments to access the current certificates of accreditation.
Search & download your certificate here.
Please visit ISO certificates and Site Quality Self-Assessments to access the current certificates of accreditation.
Search & download your certificate here.
Application
Aluminium ICP standard can be used as a calibration standard in the quantification of total aluminium concentration in quartzitic bedrock by inductively coupled plasma mass spectrometry (ICP-MS).
Analysis Note
10′000mg/L Al 溶于 5% 硝酸溶液，
由高纯 Al(NO3)3 · 9H2O、HNO3 和 水制备而成。
由高纯 Al(NO3)3 · 9H2O、HNO3 和 水制备而成。
Other Notes
For a complete product listing of our TraceCERT® range of CRMs for ICP and AAS, technical information and example certificates, please visit our ICP & AAS standards website
Legal Information
TraceCERT is a registered trademark of Merck KGaA, Darmstadt, Germany
Still not finding the right product?
Explore all of our products under 铝 ICP 标准液
signalword
Danger
hcodes
Hazard Classifications
Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1B
supp_hazards
存储类别
8B - Non-combustible corrosive hazardous materials
wgk
WGK 1
flash_point_f
Not applicable
flash_point_c
Not applicable
ppe
Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter